Introduction
The vertical shaft impact crusher, also called sand making machine and rubble shaping machine, is a kind of crusher impacted by the materials themselves. It is of high energy but low consumption and of international advanced level developed by introducing foreign outstanding technology of the same type of products. At present, it is the most advanced and practical equipment for medium-sized and fine crushing and shaping.

Application
It is widely used for medium-sized and fine crushing and shaping in the following industries: minerals, quarry, abrasive, cement, refractory materials, alumina, quartz sand, emery, glass and so on.


Operating Principle
The materials fall into the impeller from the head of the machine and with the function of high-speed centrifugal force, they strongly hit against and highly grind the other parts of the materials bypass flowing around the impeller in an umbrella form. After mutual impaction and between the impeller and the machine shell, the materials will move like a vortex and will be impacted, rubbed and pulverized many times. Then they will come to the required fineness controlled by screening equipment, and discharge from the bottom of the machine.

Features1.it features of simple structure, high crushing efficiency and low production cost. 2. it can fine crush and crude grind materials, and the crushed products are of cubic shape. 3. the influence from the water in materials to the machine is little. 4. it is suitable for crushing materials of medium, high and super hardness. 5. it works by stones hitting stones, so there is little wear for the machine and it can save energy and is of low consumption. 6. the grade and the fineness of the sand for construction after being washed can be up to the national standards, such as “sand for construction” and “cobble and broken stones for construction”. 7. it features of fine stabilization, low noise. And because it crushes materials in the cavity, the dust pollution is little. 8. when used along with the rod mill and ball one, it can simplify the flowing process, lessen the energy consumption, improve the production efficiency and cut down the cost to a large degree.


Specification

Model Max. Input Size
(mm) Power(kw) Impeller Speed
(r/min)
Capacity
(t/h)
Overall Dimension
(mm) Weight
(kg)
PCL-600 30 2x30 2000-3000 12-30 2500xФ1600x2260 5600
PCL-750 35 2x45 1500-2500 25-55 2780xФ1800x2700 7300
PCL-900 40 2x55 1200-2000 55-100 3900xФ2160x2770 12100
PCL-1050 45 2x(90-110) 1000-1700 100-160 4660xФ2450x3660 16900
PCL-1250 45 2x(132-180) 850-1450 160-300 5600xФ2950x4000 22000
PCL-1350 50 2x(180-220) 800-1193 200-360 5340xФ2940x3650 26000

Note: This specification is just reference, if there is change, it is according to our products.