We can supply PTFE rod sheet tape.
Product Name:PTFE rod
Place of Origin:China
1)Features:
There are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55to 300mm are manufactured by moulding.
PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from － 180 ℃－ +260 ℃ under no burthen circumstances. PTFE has the lowest coefficient of friction of all known solid materials.

2)SPEC:
a)Pressed rod:
Diameter(mm):2,3,4
Length(mm):produced under requirements.
b)Extruded rod:
Diameter(mm):5--120
Length(mm):500--3000
c)Die pressed rod:
Diameter(mm):55--300
Length(mm):100--300

3)Applications:
Electrical insulation,seal,anti-sticking materials.

Product Name:PTFE sheet
1)Features:
PTFE molded sheet is manufactured b molding method with PTFE granular resin.
PTFE possesses the best chemical resistance of all known plastics . It dows not age . It has the lowest coefficient of friction of all solid materials and a wide range of practicable temperature from -180 to+260centigrade.

2)SPEC:
Length(mm)xWidth(mm):150x150,250x250,300x300,450x450,600x600,800x800,1000x1000,1200x1200,1000x2000
Thickness(mm):

3)Main Porperties:
Apparent density:2.10-2.30g/cm3
Tensile Strength(min) more than 15.0Mpa
Crack elongation(min) more than 150%
Dielectric strength(min) more than 10Kv/mm

4)Applications:
Lining Bearing pads,seals,and electrical insulation.