fluoroelastomer precompounds

No Image

Model:	-
Brand:	CG-A361C CG-F2462P CG-A401C CG-F2602AP
Origin:	Made In China
Category:	Home Supplies / Household Rubber Products
Label:	fluoroelastomer , fluororubber
Price:	-
Min. Order:	100 pc

Product Description

Typical properties (Note: not for specification purpose)
Grade	CG-A361C	CG-F2462P	CG-A401C	CG-F2602AP
Gumstock properties
Solubility	soluble in low melecular weight ketones, some ester
Chlorine Content, %	66	69	66	66
Specific Gravity	1.82	1.88	1.82	1.82
Mooney Viscosity ML 1+10 @ 121 ^OC	30	40	42	38
Recommended Vulcanization Formulation for test	Precompounds 100 phr MT Carbon Black (N 990) 30 phr Ca(OH)₂ 6 phr MgO 3 phr

Grade	CG-A361C	CG-F2462P	CG-A401C	CG-F2602AP
Reological Properties(moving die rheometer, 177^oC, 6 min.)
ML, N.m	0.22	0.28	0.30	0.31
MH, N.m	1.95	1.66	2.92	2.29
T90	1'49"	1'57"	1'55"	1'55"
Ts2	0'59"	0'52"	0'55"	0'57"
Physical properties of vulcanizate
press cure	6 min. @177^oC
post cure	24hr. @ 230^oC			24hr. @ 230^oC / 12hr. @ 200^oC
Tensile Strength, MPa	14.3	14.0	14.0	14.0 / 13.0
Elongation at Break, %	230	240	190	230 / 240
Hardness, Shore A	77	79	77	76
Compression Set after 70hr. @ 200^oC aging, %	16	14	15	16

Processing
Our precompounds could be mixed with conventional fillers and other aids by rubber processing equipment. Fillers and other additives should be mixed uniformly, then added in precompounds Processing methods:compression Additionally, F2462P and F2602AP could be used in extrusion, A361C could be used in injection moldining moulding, transfer molding.

zhonghao chenguang research of chemical industry
Country/Region:	Si chuan - China
Business Nature:	Manufacturer
Phone:	+86-0813-7206298
Contact:	yang junfang (counterman)
Last Online:	08 Jan, 2007