MX-10000 Power Amplifier |
8Ω Stereo Power |
950W |
4Ω Stereo Power |
1700W |
2Ω Stereo Power |
2400W |
8Ω Bridged Mono Power |
3400W |
Max RMS Output Voltage(each channel) |
90V |
Max Peak Output Voltage |
140V |
Frequency Response(+0/-0.3dB,1W/8Ω) |
20Hz-20KHz,-3dB@150KHz |
Power Bandwidth(rated power at 4,1%THD+N) |
20Hz-20KHz,-.2dB/+0dB |
Tour Class Protection |
ACL,IGM,Auto Ramp, Short circuit, DC voltage, turn-on/off transient, current in rush, sub/ultra sonic input |
THD+N(rated power, 4Ω/1KHz |
<0.03% |
SMPTE IMD(rated power,8Ω,60Hz&7KHz) |
<0.01% |
Damping Factor(10-400Hz at 8Ω ) |
800:1 |
Input CMRR(1KHz) |
>-70dB |
Standard Voltage Gain(rated power @ 8Ω) |
0.775V |
Standard Input Sensitivity(rated power at 8Ω) |
X115 |
Input Impedance(balanced/unbalanced) |
>20KΩ/>10KΩ |
Hum and Noise(″A″ weighted,full power at 4Ω) |
-115dB |
Crosstalk(″A″ weighted,full power at 4Ω) |
>-80dB |
Class |
H |
Input Connectors(per channel) |
Female XLR(Pin2+,configurable for pin 3+).TRS(tip+) |
Output Connectors(per channel) |
5-way binding posts (2pair on Mx10000) or Speakon connectors (market dependent) |
Filter Storage |
144,000μ F |
Power Supply(factory configured) |
100V-240V,50-60Hz |
Idle Current Draw (120V) |
3.0A |
1/8 Power Curr.Draw(typical music cond.,120V/4Ω) |
12.0A |
1/3 Power Curr.Draw(cont. music cond.,120V/4Ω) |
25.0A |
Max Curr.Draw(continuous music cond.,120V/4Ω) |
36.0A |
Thermal Emissions(1/8 Power, 4Ω) |
7125 BTU/hr |
Thermal Emissions(1/3 Power, 4Ω) |
9450 BTU/hr |
Cooling |
TWO rear panel variable speed DC fans, filters detatchable with out tools |
Controls |
Front panel:2 attenuators, magnetic circuit breaker/power switch;Rear panel:Signal ground lift & mode switches; MX10000:XLR polarity & in put sens./voltage gain switches |
LED Indicators (per channel) |
Clip/Limit, Signal, Temp/DC, Active |
Construction |
Steel chassis,16gauge,Double thickness in rack ear areas |
Dimensions(H×W×D) |
7.5″×22.6″×22.4″ (190×575×570mm) |
Gross Weight |
81.8 lbs. (37.2Kg) |
Net Weight |
77 lbs. (35Kg |