CW-2 Semi-auto spring assembling machine
This machine is mainly used for assembling spring units with springs and helical wire. It is an ideal equipment for producing mattress spring units and seat cushion.
1.Small in size, controlled by one person, cost-saving.
2.The parameters such as spring unit size, helical wire diameter, end coil diameter, spring height can be set within a certain range.
3.Can complete upper and lower assembling simultaneously.
4.Auto-cutting and clenching can be realized at both ends of helical wire.
5.Auto-advancing of spring unit, auto-stop when helical wire choked.
6.Different jaws available according to customer's requirement.
Capacity 5 units/hour(16x26rows)
Max width of unit 2m
Product type A Spring orifice 80-85mm; Spring wire 1.9-2.4mm; Helical wire 1.3-1.4mm
Product type B Spring orifice 65-68mm; Spring wire 1.9-2.0mm; Helical wire 1.4mm
Product type C Spring orifice 85-90mm; Spring wire 1.9-2.4mm; Helical wire 1.3-1.4mm
Product type D Spring orifice 70-75mm (Jaw 78mm)
Helical wire gauge 1.4-1.6mm
Spring wire gauge 2-2.5mm
End coil dia 50-80mm
Motor power 0.75kw
Speed 10 units/shift
Overall dimension 460 x 400 x 1150mm
Total weight 120kg
Spring orifice 76-85mm (Jaw 88mm)
Spring orifice 70-85mm (Jaw 98mm)
Spring wire 1.9-2.4mm; Helical wire 1.3-1.4mm
Spring unit height 80-150mm
Overall dimension 3150x1650x1795mm
Total weight 950kg
Total power 2.25kw