IDE to SATA or SATA to IDE ADAPTER AUTO SWITCH
With LED Indicated power
Easy install & No driver Needed
Serial ATA 1.0 Specification compliant
Automatic Serial ATA 1.5 Gbps speed negotiation
ATA / ATAPI PIO mode 0 to 4
ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission
Support Spread Spectrum Clocking to reduce EMI
Support Partial/Slumber power management
Provide adjustable TX signal amplitude and pre-emphasis level
Slave support
Weight : 18.7g