Our good solder paste which was mixed together with the selected solder power as our brand of solder paste for SMT assembling.

Our paste flux can be set to a mixture of 9 : 1 which is the best setting to avoid thin solder on the pad, because it is our unique formulation can do this.

Our quote is cheaper, it is made in the low cost area, but with excellent features as follows:

Merits:

* Highest resistance can be read to 4.5 power to 13 (Initial reading) and power to 12 after 48hr.

* No spiting of solder balls.

* Good wetting

* Thick solder joints obtained, since true 9:1 combination, our unique formulation.

* Easy preheat setting, no stringent requirement.

* Easy screening,