Detailed Product Description

The test stand construction includes an operating handle, adjusted glass stage, die poise, clip beam of durometer, and carrick column. It is more accurately to test hardness of rubber or plastic by using this product. 

Features:
1) Fix durometer on the test stand, drive handle
2) Under weight of die poise, durometer the indenter foot on bottom of press  
    head, touch the surface of glass stage completely, the value of durometer 
    is 100+/-0.5 HA. If the value is not 100+/-0.5 HA, please adjust two vernier
    knobs until the value is 100+/-0.5HA. then place the test sample on glass 
    stage; drive handle
3) Under the weight of die poise, durometer the indenter foot on bottom of 
    press, head touch with the test sample completely. At this time, the value 
    is showed on durometer is the shore hardness of the test sample
4) If you use D type durometer, when you adjust the parallelism, please do 
    not press the tip on glass stage directly. That will damage glass stage.  
    Please place a piece of even glass board on the glass stage before you 
    adjust the parallelism