RF Card cabinet lock
Card type: Inductive cards
Series: Intelligent cabinet locks
Surface treatment: Spray painting
Exquisite appearance, rational structure, safe and reliable
Level-management
Open door by IC card, magnetic card, and mechanical key. Magnetic card is for guests freely, and IC card is used by staff durably
Main functions (patented product)

01. The rear shell and dead bolt are made of stainless steel and the front shell is made of plastic.
02. The battery and motor clutch assembly are installed at the back of the lock body, four #5 alkaline batteries are used, and the circuit board is installed on the front lock body.
03. Three level management (Main card—management card—guest card)
A. The main card is only used for allocating or deleting the management card and cannot be used for opening or closing the door.
B. The management card is used for allocating or deleting the guest card as well as for opening and closing the door. When it is used to open the door, all guest cards are deleted at the same time.
C. The guest card is used for opening and closing the door.
04. Unlocking Method: Press the trigger button on the panel of the lock body and then use the card to open the lock.
05. Normal lock opening or passage lock opening mode can be selected by turning the switch;
06. Number of guest cards, from 1 to 5, can be adjusted by turning the switch.
07. The guest card is used for opening and closing the door.
08. Compatible with two induction cards EM4100 and EM4150, it can be used in combination with the door lock and other systems, and so a single card can be used for many purposes.

Basic parameters of the door lock

01. Power supply: DC6V, Four #5 (or #7) alkaline batteries, under-voltage indication is provided.
02. Static power consumption: Less than 30μA
03. Starting current: Less than 400mA
04. Effective unlocking time: 4 to 5 seconds
05. Surface treatment: The surface of the front lock body is spray painted with silvery grey, flashing silvery and golden colors, the middle part is attached with sticky paper, and the rear lock body adopts brushed stainless steel surface treatment.
06. Environment requirement: Temperature: -20C-55C, humidity: 20%-90%.
07. Size of the front lock body: 110mm (Length) X 62mm (Width) X20. 5mm (Thickness); Size of the rear lock body: 133mm (Length) X65mm (Width) X21. 5mm (Thickness)
08. Net weight of the door lock: 459 grams.
09. Card key for the door lock: Special shaped induction card EM4100 (compatible with EM4150 card)
10. Shape: Round; Size: 30mm (diameter) X1. 0mm (thicken)

m a r y d i n g 7 ( a t ) h o t m a i l . c o m