As SOCARE BEARING one main series, this kind of Slewing bearings are skilfully just as clay in the hand of potter. 

This kind of Slewing bearing is one common type too, it is made up by three Rings (two separative outer ring and one inner ring), three-row rollers & Supports, with compact conformation,it can bear both Axdial & Radial load and the moment at the same time. It is the one kind of Slewing Bearing which can bear the most loads.

It often be used on heavyduty machines which require large working diameter,the

bucketwheel excavators, wheeled cranes, deck cranes, steel transporters, heavyduty mobile cranes etc.

The dimension scope for SOCARE BEARING is from 500mm to 6500mm.

The forgings are from the professional forging plants with power facility and timely delivery time, and we will supply you the Material Test Certificate and the finished products Test Report. 

Three-row roller slewing bearing has three seat-rings,which separate the upper,lower and radial races,via which the load of each row of the rollers may be specified.It may bear different loads simultaneously and its load capacity is the largest one among the four models. Thanks to the large size of its axle and radius,it is sturdy and especially suitable for hearvy-duty machines which require large working radius.such as bucket-wheel excavators,wheeled cranes,ship cranes,ladle turret,heavyduty mobile cranes .