solar water,solar water system,solar geyser
Thermosiphon solar collectors provides mains pressure pre-heating via a high efficiency copper coil heat exchanger located within the solar collector tank. The way in which the Mains Pressure solar collector heats water is the same as the Non pressure solar collector. Rather than using the water in the tank directly, as the Non pressure does, the type uses a 45-60 copper coil Heat exchanger inside the tank which provides more than 1.5m² of heat transfer area. When wate Heat exchanger inside the tank which provides more than 1.5m² of heat transfer area. When water flows though the coil it absorbs heat from the water inside the solar collector tank.

 For more informations,please to visit www.courelsolar.com

The solar collector tank is therefore a thermal store. One advantage of this system is that almost no water is introduced into the tank (apart from occasional topping up), so corrosion and scale buildup are almost totally eliminated. Tanks are designed for low to medium pressure applications using gravity feed tank or pressure reduction valve. Direct connection to mains pressure water supply is not permitted. Please check your local building/plumbing regulations regarding the installation of water tanks.

 

Specification

Copper Coil Heat Exchanger Specifications
HE Material	14mm×1.0mm copper pipe
HE Surface Area	2.5m² for 30 tube water heater
HE Testing Pressure	9 bar
HE net weight	22kg for 30 tube water heater

 

MODEL	Lighting	vacuum tube			Qty.per20'/40' Container
	(m2)	diameter	length	tube
SYS-C 470-1800/58-20	2.88	Φ 58mm	1800mm	20	32/65
SYS-C 470-1800/58-24	3.46	Φ 58mm	1800mm	24	30/62
SYS-C 470-1800/58-30	4.32	Φ 58mm	1800mm	30	24/50