C series 1-stage helical gear units overview:
◆ Parallel output, small size and ratio, high output speed, small energy loss, low noise.
◆ Foot-mounted, low centre-hight, mean efficiency 98%.
◆ Rotation direction of input shaft is reverse to that of output shaft.

Ratio:

CR series Helical gear units overview:
◆ Horizontal deviation of input shaft to output shaft is small, take full advantage of gearbox space, 2-stage gear and 3-stage gear is in the same box.
◆ Box of CR series reducer is unitary, so its structure rigidity is good, strength of shaft and lifetime of bearing is improved.
◆ Mounting mode: foot-mounted, flange-mounted, there are big flange and small flange so select easily.
◆ Solid output shaft,average efficiency:2-stage 96%, 3-stage 94%, combination 85%.
◆ Ratio: ratio of 2-stage is5-24.8, ratio of 3-stage is 27.2-264, ratio of combination is up to23401.
◆ For 2-stage basic type geared ,rotation direction of input shaft is the same that of output shaft; for 3-stage basic type geared ,their directions are reverse; for combination, please contact Boneng.
◆ CRM that is designed specially, can load larger axial and radial force.

Ratio:

 5-264

F series Parallel shaft Helical gear units overview:
◆ Parallel output , structure compact , carrying bigger torque,operation stable, voice low, lifetime long.
◆ Mounting mode: foot-mounted, flange-mounted, torque arm-mounted.
◆ Ratio: ratio of 2-stage is 8.1-191, ratio of 3-stage is 28.2-273, ratio of combination is up to18509.
◆ For 2-stage basic type geared ,rotation direction of input shaft is the same that of output shaft; for 3-stage basic type geared ,their directions are reverse;for combination, please contact Boneng.
◆ Output mode: hollow shaft output or solid shaft output.
◆ Average efficiency: 2-stage 96%, 3-stage 94%, F/CR 85%.

Ratio:

 4.3-273

K series helical-bevel gear units overview:
◆ Right-angled output, structure compact, rigid tooth flankcarrying greater torque,high precision gear ensuring unit to operate stably, noice low,lifetime long .
◆ Mounting mode: Foot-mounted,flange-mounted,torque arm-mounted,small flange-mounted.
◆ Input mode:direct-motor-connected, strap-connected,flange-connected.
◆ Output mode: Hollow shaft output or solid shaft output, average efficiency 94%.
◆ Ratio: ratio of basic type is 8.1-191, ratio of combination is up to 13459.

Ratio:

 8.1-191