MT-3 integrated amplifier supplies Hifi triode connection mode and standard pentode connection two models as optional. The main reason for that is for decreasing the distortion, widening frequency response and increasing dynamic range. In addition, this amplifier adopts ALPS potentiometer for volume control, rotary switch and high quality relay switch the input signal channels, push switch as the power switch, high power toroidal transformer with less magnetic leakage as the power supply, and also EI transformer as the output transformer. This amplifier could drive the bookshelf loudspeakers and floor stand loudspeakers both. The sound is balanced, delicate and liquid. The engineer especially recommends this amplifier for middle or small listening room.

Technology Specification:

Tube: EL34×4, 12AX7×2, 6N8P (6SN7GT)×2

Output power:  2×18W (Triode), 2×40W (Pentode)

THD: 0.2% （1KHz）

Frequency Response: 10Hz~70KHz

SNR: 89dB

Input Switch: 3 Groups

Input Sensitivity: 400mV

Input Impedance: 50 Kohm

Output Impedance: 4.8 ohm

Consume Power: ≤300W (Pentode)

Dimension: 358 (W)×321(D)×197(H) (Unit: MM)

Weight: 18.5Kg