Application

*Operates easily. And the kerf is narrow and beautifully.

*Only use compressed air as the gas source for cutting. The cost is cheap.

*The control circuit is: Depress voltage and rectify after using high-power IGBT inverting and then export big power direct current by Pulse Wide Modulation (PWM). It makes the power more lighter and smaller, and the efficiency is also raised more than 30%.

*Characteristic: stable, reliable, low noise and saving energy.

*The plasma temperature is very high, it can cut the carbon steel and high carbon steel, tool steel, alloy steel, stainless steel and most black metal and the nonferrous metal, such as the casting copper, cuprum, steel, aluminium, etc

Technical Data

Power voltage(V): 220+\-10%, 50Hz

Input current (A): 25

Rated output current (A): 40

Current adjustment range (A): 10-40A

No load voltage (V): 220

Duty cycle: 60%

Working style: Contact/ noncontact            

Air pressure (MPa): 0. 3-0. 5MPa       

Cutting thinkness(mm): 8

Max cutting thickness (mm): 12

Post-flow (s): 10

Overall dimention(mm): 420*220*320