This is a RIB-less programming set, so that no Motorola Radio Interface Box (RIB) is needed, no power supply being required. Simply hook it up to USB port. This programming kit is not a straight forward cable, there is an internal converter circuit board mounted in an USB plug.

This USB programming cable required that you install a driver-software in the product. The details of the driver software is in the adjunct CD. We are sorry, but we don't support a step-by-step installation assistance of this driver software by phone or any other means.

This programming cable comes wiith USB drivers, it provides quick and easy programming of the following Motorola portable radios: EX500, EX600, EX600-XLS, GL2000, GP328 Plus, GP338 Plus, GP344, GP388.

You will find that when you purchase our programming cable you will possibly never need to replace it. This cable is extensively tested at time of manufacture to be free of defects. This cable does not include any manuals or instructions for use.

Our main products are battery packs, Battery Eliminators, battery charger, earphones, Speaks Microphones, Housing, Carry Cases, Antenna, Programming Test Cable.They are suitable to famous Two-Way Radios, such as MOTOROLA, KENWOOD, Yaesu/VETEX, ICOM, TAIT, KYODO, MAXON, UNIDEN, and so on

Other products :
PMDN4043,PMDN4060,NKN6376A,RKN4043A,JMKN4124
HKN9857A
PMKN4004A
RKN4083
RKN4074A,RKN4075
JMKN4123,RTK4205
3080371E46
RTK4203C
RKN4035D
RLN4008B
HKN4137A
HLN9073
Cloning Cable,PMKN4003A,JMKN4124,PMDN4060
KPG-22
KPG-46
KGP-36
PG-2N
PG-3N
PG-4N
VX160
OPC-478
OPC-966
OPC-1132
Cloning Cable
TC-268
TC-500