This programming kit provides quick and easy programming of various Motorola radios. This is a RIB-less set, so that no RIB is needed. Simply hook it up to your computer. This programming kit is not a straight forward cable, there is an internal converter circuit board built into it. The programming kit has a DB9F for connection to the serial port of your PC and the appropriate plugs for the specific Motorola radio model as specified below.

Cable features RJ45 connector is to programme following Motorola radios: CDM750, CDM1250, CDM1550, CDM1550-LS, CDM1550LS Plus, CM140, CM160, CM200, CM300, CM340, CM360, DeskTrac, EM200, EM400, GM1280, GM140, GM160, GM300, GM3188, GM338, GM340, GM360, GM3688, GM380, GM640, GM640, GM660, GR1125, GR1225, GR300, GR400, GR500, GTX Mobile, LCS2000, LTS2000, M10, M100, M120, M1225, M130, M200, M400, MaraTrac, MaxTrac, MCX760, MCX780, PM400, PRO3100, PRO5100, PRO7100, SM120, SM50 etc...

Cable features Battery Case connector is to programme following Motorola radios: GP280, GP300, GP600, GP88, LTS2000, PTX600  etc...

Cable features 2.5mm jack is to programme following Motorola radios: AXU4100, AXV5100, CP040, CP125, CP140, CP150, CP160, CP180, CP200, CT150, CT250, CT250-LS, CT450, CT450-LS, EP450, GP308, GP3688, GP2000, GP2100, P020, P030, P040, P080, PR400, PRO2150, PRO3150 etc...

You will find that when you purchase our programming cable you will possibly never need to replace it. This cable is extensively tested at time of manufacture to be free of defects. This cable does not include any manuals or instructions for use.