|Origin:||Made In China|
|Category:||Construction & Decoration / Slate, Marble, Granite & Stone / Fireplace|
|Label:||Water Vapour Fires , 3D Water Vapour , 3D Water Fires|
|Min. Order:||1 pc|
BB 3D Water Vapour Electric Fireplace in Shanghai
Revolutionary ultrasonic technology is used to create the flame and smoke effect of the BB 3 dimension. As the mist rises up through the logs, the light reflects against the water molecules creating a convincing illusion of flames and smoke. The result is an appearance so authentic it will be mistaken for a true wood-burning fire.
1. Dimension of the 3D water vapour fireplace can be custom made for any WxHxD mm
2. We can cover with the wood log or the stone. The height is approx. 150-200mm;
3. 220V 50Hz flame power 210W
4. Water capacity：1 liter or more depends on the size of the fireplace
5. Make use of the Led light to produce the flame that seems come out from the wood or stone to the air like burning. The smoke with the flame comes out from the wood as well.
6. 1.5-2 meter fan at 45° under the log
7. BB 3D three dimension fake real fire electric fireplace, it was fabricated without any screen design
8. There is no duct work, not produce of any heat
9. Energy save, easy to install and handle
10. No chimney and can be see through
It is the best three dimension fake real fire electric fireplace at this moment.
How to install
1) Put the BB 3D fireplace in the place that will be installed.
Turn off the power point. Take out the wood logs or stone. Than take the water task out for water refill.
2) Refill the pure or distil water, do not use the tap water. Be careful not to overflow the water. Put the water task back the origin position. One liter of water can used for 5-10 hours depends on the fire size.
3) Put the wood logs or stone back and turn on the power. About 3 minutes, the flame and smoke will come our automatically.
4) If you want to move the fireplace, please take out all the water out before moving, otherwise the fireplace will be short circuit and damaged.
We recommend the 3D water vapour fireplace not used over 10 hours.
We have a high temperature level control, if the fireplace running out of water, that means there only light and have no smoke or fire. You have to closed it for half an hour to cool it down.
Our contact email is [email protected]
Mr. Peter Ma
|Country/Region:||Hong Kong S.A.R|
|Contact:||Mr. Peter Ma (Manager)|
|Last Online:||08 May, 2021|