Hipot & Insulation Tester proceeds insulation resistance and Hipot test at the same time, and has selection mode for manual / auto operation. The current is figured out on the Current Meter. Insulation tester can be easily preset able and automatically decided. This tester has various signals input/output functions for the connection of other device/auto line. Common Specification: Items | Hipot Tester | Insulation Tester | Ac power source | AC 110/220 V ± 10 %, (50 ~ 60 Hz) | AC 110/220 V ± 10%, (50~60 Hz) | Output Voltage | Mode 1 AC 0 ~5 kV | Mode 1 DC 500 V | ----------------- | Mode 2 AC 0~2.5 kV | Mode 2 DC 1000 V | Current Limit | Max. 19.19 mA by 0.01 mA step | -------------------- | Test Range | ----------------------------------- | For DC 500 V, 0~1000 M Ohm For DC 1000V, 0~2000 M Ohm | Decision Method | Auto Decision (Good/Bad) | Auto Decision (Good/Bad) | Test Procedure Good/Bad Decision) | Preset able | Preset able | Signal Input and Output | Bad, Reset ,Enable, Real time test, GND open protect | Bad , Enable ,Test ON |
Benefits: • Reliable and accurate test result • Removing of arc by Arc Detector • Removing unnecessary impulse (SSR) Zero Cross Detect Method) instead of Relay contact. • Prohibition of noise or disoperation by photo coupler for the connection of other device. • Calibration Report (ISO 17025 |