GSM Setting Information:

1.       Insert the SIM card to the back socket.

2.       When there is telephone line available, the GSM only send SMS, not dial. (the telephone would dial), when there is no telephone line available, the GSM would dial after sending out SMS.

3.       The time would be updated when receiving any SMS, that is to ensure the time is right, so that auto timed arm/disarm would be function properly.

4.       Character GSM on LCD flashes indicates it is sending SMS to all the set numbers, the character GSM shows steadily and Alarm LED flashes indicates the GSM is dialing

5.       When you delete all the information in the panel (back to factory default setting), the GSM inforation would also be deleted (if LCD shows 5m 10d 20h 08m d7), that means the all the infor are deleted, and it would not keep time.

6.       After password, times of ringing, and phone numbers are set, turn it off then on, the panel would automatically transmit password, times of ringing and telephone number to GSM module, then the gsm would keep time. When you send SMS to GSM, panel would adjust time automatically.

7.       How to set SMS: Use another mobile phone to send SMS to the GSM panel. The short message contains: Password+ serial No.+ content(you can wirte connect as you like), the serial numbers are: 01,02,03…08,09….16, e.g. the default password is: 123456 (if it is changed, please use changed password), Press and hold * key, the 6 digit shows U, the panel enter into SMS setting status, at this time, you can send SMS to the gsm panel from another mobile.

SMS: 1234560111 zone 1 fire alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 01. if it fails, the 8^th digit would show E.

When zone 1 alarms, the panel would send this message.

SMS: 123456022 zone 2 panic alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 02. if it fails, the 8^th digit would show E.

When zone 2 alarms, the panel would send this message.

SMS: 123456033 zone 3 entry/exit alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 03. if it fails, the 8^th digit would show E.

When zone 3 alarms, the panel would send this message.

SMS: 123456044 zone 4 burglar alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 04. if it fails, the 8^th digit would show E.

When zone 4 alarms, the panel would send this message..

SMS: 123456055 zone 5 burglar alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 05. if it fails, the 8^th digit would show E.

When zone 5 alarms, the panel would send this message.

SMS: 123456066 zone 6 burglar alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 06. if it fails, the 8^th digit would show E.

When zone 6 alarms, the panel would send this message.

SMS: 123456077 zone 7 burglar alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 07. if it fails, the 8^th digit would show E.

When zone 7 alarms, the panel would send this message.

SMS: 123456088 zone 8 watchdog alarm, when the GSM panel gets this SMS, the 8th digit on the LCD would show 08. if it fails, the 8^th digit would show E.

When zone 8 alarms, the panel would send this message.

SMS 09: remote ask for assistance, the setting is the same as the above

SMS 10: Tamper alarm, the setting is the same as above

SMS11: phoneline cut alarm, the setting is the same as above

SMS12: main fails alarm, the setting is the same as above

SMS13: pin code wroing for 3 times alarm, the setting is the same as above.