Introduction

C frame with great rigidity and spacious working area. There are three working stations in this machine inclusive of one station for printing operation. Stations-change will be carried out automatically. The gripper system is suitable for blanks with different thickness. There are stops located at ‘zero’ position. Workpieces are supported by working table with rolling balls.

The movements in X and Y axes are controlled by servo motor and lead ball screw. The punching position is controlled by biaxial NC controlling system. The processing data can be input into the controlling system and displayed on CRT screen

Technical Characteristics:

1. Integrated machine with machanical, electrical and hydraulic systems;

2. PLC control and servo-motor feed-in;

3. Self-diagnostic function;

4. Easy programming and connectable with data generated directly from copying the specimen;

Advantages:

1. Modular assembling for main functional parts, easy maintenance;

2. Punching, printing and drilling operations on one plate;

3. Efficient drilling operation by fast approach, slow working and fast return program;

4. On programming, either input punching diameter, location and quantity of workpiece, or network locally with design department to interchange data base;

5. Constant workpiece accuracy and good operating condition

On request, CJ100 machine can also be equipped with drilling unit whose technical data are

as follows