Moldproof and flame retardant electronic sealant series:

  Applied field:

Washing machine electric water-heater,microwave oven,inducion cooker,fridge,intelligent tool,electromo-bile,pulse combustion,etc that include kinds of intelligent microcomputer control board,cable joint,printed circuit board,filter,IC controller,voltage changer,inductor,noise rejector and so on.

 Characteristic:

I:room solidification,either manual or mechanical sealing is ok.

II:good adhesive power to metal,plastics,glass wood,etc.

III:excellent mold proof and flame retardant ability.

IV:good stability,up to bis-hundred experiment.

V:environment friendly,non-VOC and up to WEEE and RoHS.

VI:repairable,PCB can be checked when needed.

 

Function and Performance:

I:excellent moldproof and water proof ability.Born to boiling waterover 100hrs.

II:good shockproof,it is elastic and can absorb shock energy effectly.

III:dustproof,its thickness can up to your request.

IV:highest grade moldproof performance.

V:flame retardant,prevent electric spark from PCB.

VI:non-conductive,has no bad effect to the performance of the control board.

 

Technological specification:

Flame retardant(vertical firing):94V-0      Shore hardness: 27±3A

Moldproof:0                          Volume resistivity: 5.0×10¹⁰Ω.M

Tensile strength: 0.8Mpa                 Dielectric strength: 22.12MV/m

Breaking elongation ratio:103%           Dielectric constant: 4.0×10⁶Hz

Water absorbing:0.08%                  Dielectric loss: 9.2×10⁴Hz

 

Pack and storage:

Galvanized lron drum,20kg/drum

Keep in ventile,dry,shady and cool place.

 

Transportation:

Non-dangerrous good,take itas usual chemicals.

 

Notice:

I:bth A and B must be in appropriate quantity.Mix them uniformly.If envelop PCB manually,please use it one-off.

 

II:If A and Bare left after opende,screw its lid in tightly.