The Dry Bath Incubator is a microprocessor-controlled product using advanced thermoelectric technique. With
this technique, more stable and accurate temperature control is achieved. Replacement is convenient with
optional metal modules of various specifications configured for different types of test tubes.

Features
1. LCD display. It easy to setup and use      
2. Simultaneous display of set and actual time, temprature             
3. As it is equipped with various optional blocks, the instrument can adapt to different tubes & wells to cope with experimental needs. Tt is easy to replace the metal blocks and is very simple to clean and sterilize. Customized blocks are available to suit your specific demands
4. Reliable design with inner extra temperature protection
5. Heave of the block makes block change easy and convenient
6. Temperature deflection adjusting meet with different demands
7. Microprocessor controlled incubation time and temperature.
8. Beep-signal / Stop after program completion
9. Conforms to CE safty standard

Specification
1. Temp. Control Range: -10℃~100℃
2. Timing Range: 1min~99h59min
3. Temp. Control Accuracy:≤ ±0.3℃
4.. Display Accuracy: 0.1℃
5. Heating Time: ≤ 15min (from 20℃ to 100℃)
6. Cooling Time:  ≤ 20min (from 20℃ to -5℃)  If the room temperature is lower 30℃
               ≤ 30min (from 20℃ to -10℃)  If the room temperature is lower 25℃
7. Heating and Cooling Parts: TE Module
8. Dimension (LxWxH): 300x220x170 mm
9. Net Weight: 5Kg
10. Standard Blocks: See " Dry Bath Blocks for MK-10/MK-20/MS-100/MSC-100"

Dry Bath Blocks for MK-10/MK-20/MS-100/MSC-100

Type	Parameter	Max. Temp	Min. Temp （MK-20）	Max. Speed (rpm)
A	96×0.2ml	100℃	-10℃	1500
B	54×0.5ml	100℃	-10℃	1500
C	35×1.5ml	100℃	-10℃	1500
D	35×2.0ml	100℃	-10℃	1500
E	15×0.5ml+20×1.5ml	100℃	-10℃	1500
F	24×Dia.≤φ12mm tube	100℃	0℃	1200
G	12×15ml Falcon tube	100℃	0℃	750
H	6×50ml Falcon tube	100℃	0℃	750
I	103×67×30 Water bath block	100℃	0℃	1500