65W Open Frame Power Supply

Model:	BNF650000
Brand:	BNT
Origin:	Made In China
Category:	Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution
Label:	open frame power , open frame supply , power supply
Price:	US $1 / pc
Min. Order:	500 pc

Inquire Now

Product Description

Model		BNF6533120	BNF6550120	BNF657580	BNF6512052	BNF6513547	BNF6515042	BNF6524027	BNF6527024	BNF65480135
Output	DC voltage	3.3V	5V	7.5V	12V	13.5V	15V	24V	27V	48V
	Rated current	12A	12A	8A	5.2A	4.7A	4.2A	2.7A	2.4A	1.35A
	Current range	0~12A	0~12A	0~8A	0~5.2A	0~4.7A	0~4.2A	0~2.7A	0~2.4A	0~1.35A
	Rated power	39.6W	60W	60W	62.3W	63.5W	63W	64.8W	64.8W	64.8W
	Ripple & Noise	80mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	150mVp-p	100mVp-p	100mVp-p
	Voltage adjust range	3.14~3.63V	4.75~5.5V	7.13~8.25V	11.4~13.2V	12.8~14.9V	14.25~16.5V	22.8~26.4V	25.65~29.7V	45.6~52.8V
	Voltage tolerance	±3%	±3%	±3%	±2%	±2%	±2%	±2%	±2%	±2%
	Line regulation	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
	Load regulation	±3%	±3%	±3%	±2%	±2%	±2%	±2%	±2%	±2%
	Set up time, Rise time	800ms,20ms at full load
	Hold-up time	60ms at full load
Input	Voltage range	90~264Vac, 135~370Vdc
	Frequency range	47~63Hz
	Efficiency	±69%	±76%	±79%	±79%	±79%	±79%	±80%	±80%	±80%
	AC current	1.2A/115Vac; 0.72A/230Vac
	Inrush current (max.)	Cold start 20A/115Vac, 40A/230Vac
	Leakage current(max.)	<0.75mA/240Vac
Protection	Over load	73~105W (3.3V:51 ~75W) (5V:70~105W) rated output power
		Protection type:hiccup mode,recovers automatically after fault condition is removed
	Over voltage	3.8~4.46V	5.75~6.75V	8.63~10.1V	13.8~16.2V	15.5~18.2V	17.25~20.25V	27.6~32.4V	31~36.45V	55.2~64.8V
		Protection type:hiccup mode,recovers automatically after fault condition is removed
Environment	Working Temp.	-10~+40℃
	Working Humidity	20%~90% RH non-condensing
	Storage Temp. Humidity	-20℃~85℃, 10%~95% RH
	Temp. Coefficient	±0.04%/℃ (0~50℃)
	Vibration	10~500Hz, 2G 10min/ cycle,period for 60 min,each along X,Y,Z axes
Safety & EMC	Safety Standard	UL60950-1, EN60950-1;EN60065
	Withstand voltage	I/P-O/P:3KVac
	Isolation resistance	I/P-O/P: 100M ohms/500Vdc
	EMI condition & radiation	Compliance to EN55022 class B, FCC part15 class B
	Harmonic current	Compliance to EN6100-3-2,3
	EMS immunity	Compliance to EN6100-4-2
Others	MTBF	100Khrs min, MIL-HDBK-217F(25℃)
	Dimension	120mm72mm35mm
	Packing	---------
Note	1.Al l parameters are specified at 230Vac input, rated load,25℃ 70% RH ambient;
	3.Ripple & Niose are measured at 20Mhz bandwidth by using a 30cm twisted-pair wire terminated with a 0.1uf & 47uf parallel capacitor
	4.Tolerance: includes set up tolerance, line regulation, load regulation,
	5.Line regulation is measured from low line to high line at rated load,
	6.Load regulation is measured from 0%~100% at rated load
	8.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed that is
	still meets EMC derectives.

Model		BNF6533120	BNF6550120	BNF657580	BNF6512052	BNF6513547	BNF6515042	BNF6524027	BNF6527024	BNF65480135
Output	DC voltage	3.3V	5V	7.5V	12V	13.5V	15V	24V	27V	48V
	Rated current	12A	12A	8A	5.2A	4.7A	4.2A	2.7A	2.4A	1.35A
	Current range	0~12A	0~12A	0~8A	0~5.2A	0~4.7A	0~4.2A	0~2.7A	0~2.4A	0~1.35A
	Rated power	39.6W	60W	60W	62.3W	63.5W	63W	64.8W	64.8W	64.8W
	Ripple & Noise	80mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	150mVp-p	100mVp-p	100mVp-p
	Voltage adjust range	3.14~3.63V	4.75~5.5V	7.13~8.25V	11.4~13.2V	12.8~14.9V	14.25~16.5V	22.8~26.4V	25.65~29.7V	45.6~52.8V
	Voltage tolerance	±3%	±3%	±3%	±2%	±2%	±2%	±2%	±2%	±2%
	Line regulation	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
	Load regulation	±3%	±3%	±3%	±2%	±2%	±2%	±2%	±2%	±2%
	Set up time, Rise time	800ms,20ms at full load
	Hold-up time	60ms at full load
Input	Voltage range	90~264Vac, 135~370Vdc
	Frequency range	47~63Hz
	Efficiency	±69%	±76%	±79%	±79%	±79%	±79%	±80%	±80%	±80%
	AC current	1.2A/115Vac; 0.72A/230Vac
	Inrush current (max.)	Cold start 20A/115Vac, 40A/230Vac
	Leakage current(max.)	<0.75mA/240Vac
Protection	Over load	73~105W (3.3V:51 ~75W) (5V:70~105W) rated output power
		Protection type:hiccup mode,recovers automatically after fault condition is removed
	Over voltage	3.8~4.46V	5.75~6.75V	8.63~10.1V	13.8~16.2V	15.5~18.2V	17.25~20.25V	27.6~32.4V	31~36.45V	55.2~64.8V
		Protection type:hiccup mode,recovers automatically after fault condition is removed
Environment	Working Temp.	-10~+40℃
	Working Humidity	20%~90% RH non-condensing
	Storage Temp. Humidity	-20℃~85℃, 10%~95% RH
	Temp. Coefficient	±0.04%/℃ (0~50℃)
	Vibration	10~500Hz, 2G 10min/ cycle,period for 60 min,each along X,Y,Z axes
Safety & EMC	Safety Standard	UL60950-1, EN60950-1;EN60065
	Withstand voltage	I/P-O/P:3KVac
	Isolation resistance	I/P-O/P: 100M ohms/500Vdc
	EMI condition & radiation	Compliance to EN55022 class B, FCC part15 class B
	Harmonic current	Compliance to EN6100-3-2,3
	EMS immunity	Compliance to EN6100-4-2
Others	MTBF	100Khrs min, MIL-HDBK-217F(25℃)
	Dimension	120mm72mm35mm
	Packing	---------
Note	1.Al l parameters are specified at 230Vac input, rated load,25℃ 70% RH ambient;
	3.Ripple & Niose are measured at 20Mhz bandwidth by using a 30cm twisted-pair wire terminated with a 0.1uf & 47uf parallel capacitor
	4.Tolerance: includes set up tolerance, line regulation, load regulation,
	5.Line regulation is measured from low line to high line at rated load,
	6.Load regulation is measured from 0%~100% at rated load
	8.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed that is
	still meets EMC derectives.