Sand Washer

Sand Washer is generally used to clear up and remove the dirt and contaminate mixed in sandstones matched with the sand making machine. Novel sealing structure, adjustable overflow weir and reliable transmission system could fully ensure the complete washing and dehydrating. It is frequently used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factory’s quartz sand, refilling pressure sand, highway, water conservancy and constructions.

Working Principle

The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Technical parameter:

Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.

Technical Data:

★ NOTE： If the specification or appearance has changed,we will not notify additionally