Thermoplasticity plastic HDPE, PP, PVDF, the PE can show the characteristic best. Extrusion Welder is forbidden to use for the plastic with electric conduction (PE-EL), which can bring electric conduction short circuit of the machine. This machine is used for the fourth part of the barrel bath and the tube that accords to the standard of the DVS (Germany Welding Association). It can once weld the welding line with width of more than 10mm and plastic board with thickness below 40mm.

Voltage: 220V
Drive Motor 1020 W / heat blast 3400 W
Temperature Wind Temperature20—650 degree, Heating temperature while plastic extruding is 20—300 degree
Warm-up heat blast volume 500L/min
Diameter of Welding Rod φ 3.0mm