Maximum machining area

1270×2540 mm

1500×3000 mm

2000×4000 mm

Height from cross beam to workbench

200 (mm)

200 (mm)

200 (mm)

X-axis speed:

30m/min

Y-axis speed

20m/min

Z-axis speed

20m/min

Repositioning accuracy:

±0.1mm

Spindle:

Air –cooling

Rotating speed of spindle:

24000rpm

Tool shank:

ISO 30

X-axis drive mode

Japan Servo Motor, German Dual gear rack and pinion , linear guide

Y / Z axis drive mode:

Japan Servo Motor, ball bearing screw , linear guide

CNC System:

KND CNC

Material clamping and pressing devices

12 pcs/set

Environment-friendly, safe and protective devices, humanizing devices

Photoelectric protection in operation, Laser safety light curtain (divided into double work areas), milling scrap recovery system,

Dimension (L × W × H)

3500×2280×1800mm

3850×2560×

1800

5000×3900×1800mm

Installation of fourth / fifth-axis:

Installation of 3 +1 linkage along X-axis / installation of forth-axis interpolation linkage in the machine head

Installation of rotary C-axis:

The workpiece can realize machining of three sides for one-time clamping, -90 degrees to 90 degrees, the minimum setting angle: 0.5 degree, accuracy ± 0.1 degree

Tool change system and tool magazine

 

Installation of tool change function (time of tool change: 5/10s)

Tool magazine capacity: 8

Operating system

Delta (Taiwan) / Mitsubishi (Japan) / REXROTH (professional software for German profile, 18 module packages, WIN XP)

Tool detection

Automatic measurement of tool length/ automatic tool sensor

Installation of vacuum adsorption

Vacuum adsorption workbench and vacuum pump

Tool accessories

ISO30 tool bit/ Clamps / Tool/suction device

Bar code scanners and supporting software

For mass production, the profile data are automatically read, automatically implement the same machining procedure