Model: | E-8 |
---|---|
Brand: | RLAKY |
Origin: | Made In China |
Category: | Computers & AV Digital / AV Equipment / AV Peripheral |
Label: | PA Mixer , Professional Mixer , sell Mixer |
Price: |
-
|
Min. Order: | - |
Model:E-8
MIC INPUT(XLR)
Connect Microphones here.If you are using a condenser mic,ensure phantom power is supplied by pressing the seitch at the top of the master section(Warning:DO not apply phantom Power before connecting a microphone)
LINE INPUT(1/4”Jack)
Connect Line level sources here,e.g.Synth,Drum Machine,Dletc
INSERT POINT(1/4” jack)
Connect signal processors here,e.g. Compressor,Gate etc
GAIN CONTROL
Adjust these to increase or decrease the level of the incoming signal
EQ STAGE
Adjust these controls to change the signal tone(the character of the signal)
AUX SENDS
Adjust these controls to change the level of the signal to an FX unit or an artist's monitors(headphones /in-ear/stage monitors).Aux1&2 are switchable pre/post fade
PAN CONTROL
Use this control to position the signal within the stereo field
MUTE SWITCH
When this is pressed ou will hear no signal from the channel(post-mute signals)
SOLO
When pressed the signal will appear on the monitor outputs-use this to montior the post EQ signal from the channel
PEAK LED
This is used to indicate that the signal close to distorting(clipping )on a specific channel
INPUT CHANNEL FADER
This is used to control the level fed to the Mix Bus and post-fade sends
MIX OUTPUTS(XLR)
Connect these to your analogue recording device,or to your amplification system
MIX INSERTS(1/4”jack)
This is a pre-fade break in the signal path which can be used to feed ad dynamics or mastering device.The dignal is sent from the tip of the jack plug and the return path comes back in on the ring of the jack plug
MONITOR O/Ps(1/4”jack)
These are used to feed your monitoring system.This can be directly connected to powered monitors ,or indirectly via an amplifier to standard monitors
MASTER FADERS
These faders control the overall level of the mixbus
MAIN METERS
These show the lebel of the mix outputs.When the SOLO LED is lit,the meters show the level of the signal sourced
MONITOR CONTROL
This controls the level of the signal sent to your monitoring systern
PHONES CONTROL
This controls the level of the signal sengt to the headphones jack socket
AUX OUTPUTS(1/4”Jack)
These two outputs can be used to send the channel signal to an FX unit or an artist's montiors(headphones/in-ear/stage monitors).Aux 1&2 are switchable pre/post fade
AUX CONTROLS
These two switches globally switch the AUX1 and AUX2 feeds respectively,on all the input modules to be either pre or post-fade
STEREO INPUTS(1/4”Jack)
These two inputs can be used to connect line level stereo inputs from keyboards,sound modules,samplers,computer based audion cards etc.These inputs pass through a normal channel strip,with EQ Auxes and a Balance control
PLAYBACK INPUTS(RCA PHOTO)
Here ou can connect the playback from your recording device
PLAYBACK CONTROLS
Use these to control the playback signal.The Monitor PLAYBACK switch sends the signal to the monitor outputs and phones,whilst the PLAYBACK TO MIX switch sends it to the main mix
RECORD OUTPUTS
Here you can connect the input to your recording device
PHANTOM POWER
Press thies to switch the phantom power(48V)on for condenser microphones
WARning:Do not apply Phantom Power before connecting a microphone
HEADPHONES(1/4”Jack)
Plug your headphones into theis socket
RLAKY Electironic Co.,Ltd | |
---|---|
Country/Region: | Zhe Jiang - China |
Business Nature: | Manufacturer |
Phone: | 13906890397 |
Contact: | Rlaky (manager) |
Last Online: | 04 Sep, 2015 |