Model CXW Forming Fabric Loom

This is a wide heavy loom designed on the basis of our nationality and drawing lessons from the products both at home and abroad. It is used to weave polyester single-layer and multi-layer forming fabrics for papermaking, dryer fabric, and filter sieve and press screen used in other industries.

Technical Parameters:
1. Range of polyester monofilament: 0.1~1.0mm
2. Weft density: 100~1200 picks/10cm
3. Netting width: 5.5m, 12.5m.
4. Max. loom speed: 37rpm
5. Gross power of the complete machine: 30～41 KW
6. Weight: about 45～65T
7. Overall dimension (mm):
length×width×height: (11200～18200)×7550×2600

Main constructions:
1. Framework: the main wallboard adopts iron box structure; the complete machine is combined with fissions.
2. Main drive: adopting bilateral motor two-sided coaxial drive; double pneumatic clutch.
3. Weft insertion mechanism: adopting hydraulic picking mode; automatic weft holding; pneumatic shuttle checking; six-color weft selecting device.
4. Shedding mechanism: adopting two-sided dobby shedding; sixteen heald frames.
5. Beating-up mechanism: adopting multi-fissions combined crank four-linkage weft beating.
6. Take-up mechanism: adopting electronic control three-roller positive take-up.
7. Let-off mechanism: adopting electronic control positive let-off (double warp beam, flange-separating warping).
8. Web-rolling mechanism: adopting external superficial web rolling driven by independent torque motor.
9. Lubricating system: The complete machine is lubricated with automatic grease lubrication and hand pump centralized oil lubrication.
Control system: With PLC computer control system, the complete machine can freely set various parameters and automatically display faults.