TDM over IP Converter
1.Overview
With the advanced technology on clock recovery, F5-23x5 series TDM over IP converters achieve TDM signal transmission over the IP network. The device provides 1 to 4 framed and unframed E1 channels, and 1 traditional Ethernet data port. It is widely used with wireless LAN.

2.Features
Transmission 1 to 4 framed & unframed E1 channel and 1 traditional Ethernet data over IP network
Advanced technology on clock recovery and data buffering making TDM signal transmission with high efficiency and without loss
Four clock resources option brings stability and flexibility
E1 signal transmitted on the IP network with QoS guarantee
Transmitted package based on the IP address, through switches, router and other IP network equipment
Configurable package size and delay time making it adaptive for various network environments
MDI/MDI-X auto-crossover, 10/100M auto-negotiation and speed limitation supported on both UPLINK port and local Ethernet data port
3.Management
Provide console management
Upgraded to SNMP/WEB management
View and configure the E1 and Ethernet ports status, such as E1 framed and unframed mode setting, E1 loopback, Ethernet ports rate limitation, clock resources selection, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Provide user management to ensure the device operation security

4.Specifications
Power
AC Input: 100~240V
DC Input: -48V
Power Consumption: #8804;15W

E1 ports
Compliant with: ITU-T G.703, G.704, G.823
Rate: 2.048Mbps ?50ppm
Code type: HDB3
Impedance: 75 ohm unbalanced & 120 ohm balanced
Physical connector: BNC for unbalanced & RJ45 for balanced

Ethernet ports
Compliant with: IEEE802.3, 802.3u, 802.3x
Rate: 10/100Mbps auto-negotiation
Duplex: Half/Full auto-negotiation
Physical connector: RJ45