Inclinometers apply to construction machinery filed

 

Our Products Range.

Vigor Tech is the leader of angle measurement field.

We always supply the advanced and good performance tilt sensors to the construction machinery.

• Static Inclinometer--20 types, it has good ability to resist vibration filter and suitable for measuring in static.

SST20 Static Inclinometer:

▲ Low cost, high performance, suitable for batch application 
▲ 50Hz refresh rate, 10Hz response frequency 
▲ ±0.07°accuracy@-15~50℃ 
▲ ±0.2% cross-axis error 
▲ Available to horizontal, vertical, headstand, etc installation methods 

• Quasi-Dynamic Inclinometer--8 types, it’s suitable for measuring under affection on continuous acceleration.

SST0513 Quasi-Dynamic Inclinometer:

▲ ≤ ±0.3°@2g acceleration within 5s time

▲ CAN/CANOpen & Relay output

▲ Set 2 alarm points each axis

▲ Relay life≥5×10 6

▲ Range ±90°or 360°

▲ Resolution 0.01°, accuracy 0.05°

▲ Compensated cross‐axis and temp. drift errors

• Dynamic Inclinometer--5 types, it’s suitable for measuring in dynamic slope.

SST510 Dynamic Inclinometer:

▲ Special to transmission of truck or heavy vehicle

▲ Resistance of shock and vibration

▲ ≥0.5ms update slope data while vehicle moving

▲ No influence by speed, lane moving, acceleration and operating mode

▲ Dynamic accuracy≤0.5°, static accuracy≤0.2°

▲ Output slope & roll angle data

▲ Independent work without external aiding

 

• More than 4 types Inclinometer can stand 400g impact.
• More than 3 types Inclinometer are suitable for applying to the inside of drill pipe.

Basing on our many years experience, we think the important premise for achieving high safety is that can accurately measure the angle by tilt sensor under emergency.

 

Ø Our typical customers in global.

 

Ø  Our products are successfully and widely applied to kinds of model.