The equipment is widely used to sandblast to the steel sectional material, panel and so on in the open. It can get better effects in rust, oxide skin and burrs removal. One of its characteristics is the switch is designed on the spray gun, operator is easier to sand blast to the work pieces.

Technical Data:

Abrasive: corundum is recommended, other abrasive are also permitted, such as quartz sand, steel sand and so forth.

Granularity: 16#--80#

Sand tank: the volume of the sand tank is about 0.48m3 and the largest volume of the abrasive is 0.3m3.

Use level: if the corundum is used, it should be no more than 600kg for one time to be added.

Process gun: One hand-operated gun, the diameter of the jet: φ12mm.

Pressure of compressed air: 0.5-0.7Mpa,     air consumption of the machine: 4m3/min

Connection size of the air-ducts: outside diameter: φ40mm