| CNC Router Machine With Circular Saw And Cutter Blade |
| Equipment functions |
| cutting, engraving, milling, punching, and pushing. |
| Equipment functions |
| 1.One 9KW high-power air-cooled spindle is used for slot milling, drilling, etc. 1 set of swing-head saw clamped saw blades are mainly used for cutting materials, with high efficiency. It runs smoothly and can give full play to the advantages of this machine's high speed. |
| 2.The bed part is welded with thick and heavy steel structure, processed by vibration aging treatment and processed by precision CNC machining center to ensure its high stability and machine tool accuracy. |
| 3.Taiwan 30mm square linear guide is used in the long direction, 25mm straight to the bottom in the width direction and Z axis, double-row and four-row ball slider, large bearing capacity, stable operation, and fully guarantee the machining accuracy and wear resistance. |
| 4.The grinding ball screw has high precision and precise cutting. It adopts the Taiwan Baoyuan control system and recognizes Beijing Jingdiao software, which is especially suitable for complex and multi-cut flower-shaped engraving, with fast speed and high precision. |
| 5.Professional design of high-adhesion vacuum adsorption device, table partition, vacuum adsorption and high-power vacuum pump, which can effectively adsorb different sizes of plates, and the adsorption is firm. |
| 6.Equipped with highly flexible wires and cables, it can reciprocate 20 million times, and the drag chain is widened to ensure that the shielded wire will never be damaged. |
| 7.It is driven by Leisai 1500W pure servo motor and matched with Taiwan high-precision reducer. |
| Model |
SHCNC-4520 |
| Working table size |
4500*2000mm |
| X/Y/Z axis travel |
4500*2000*200mm |
| Positioning accuracy |
±0.05/1000mm |
| X/Y maximum flight attendant speed |
60m/min |
| X/Y maximum processing speed |
40m/min |
| Z-axis maximum flight attendant speed |
35m/min |
| Maximum processing speed of Z axis |
10m/min |
| Operating Voltage |
AC380V/50HZ |
| Run command |
G code M code |
| Table stroke |
4500*2000*200mm |
