YD228B single liquid dispenser, sophisticated appearance beautiful, space saving placement of the dispenser, the dispensing time, the control of digital display can be a very intuitive control of the amount of their out of plastic. Applicable to all kinds of industrial fluid dispensing pneumatic applications. With control of dilution fluid back to suction using the vacuum function, there are regular mode of operation and continuous operation modes; out of plastic fast, one with the will, the operation's that simple.
     Scope of application:
     Tone up magnetic fluid dispenser for vinyl, paints, lubricants, solder paste, silver paste, ink, mud oil resistance SWT, red rubber, silicone, UV glue, quick dry rubber, chemical test Fiji, Crystal, epoxy resin, yellow plastic, glass, plastic, thermal compound, speaker adhesive, wear rubber, plastic screws, electrolyte, magnetic fluid, flux, alcohol, mark, paint, water, silicone
     Applicable products:
     Automotive Electrical Appliances bearings packed circuit boards of electronic components, electrical components of the camera capacitor production process of pharmaceutical processing machines jewelry quartz crystal IC lighting relay radio equipment wire connectors
     Features:
     1, using high-pressure air at the set time, using the foot switch or automatically release the liquid.
     2, there is bit by bit, and even moving, timing Epoxy function; bit by bit is the direct trigger a foot pedal Epoxy, and can be time-control dispensing volume precision; linked is the closing time of the foot pedal to control the Epoxy long time; Epoxy is the trigger switch from time to time through the time control Epoxy
     3, using high-precision digital timing controller, precise control of each titration time, accurate to the millisecond, correctly control the flow of liquid material will not be a waste liquid material.
     4, as long as regulate the air pressure, time, and select the appropriate needle Tsui, then easily change the amount of each Note and the note drop drop time. Epoxy solve many problems, easy to use, quick operation easy to use,
     5, is equipped with a vacuum suction function back, anti-vacuum back system; so that the liquid inside the syringe does not automatically drop out or retraction, can control the viscosity of different liquids, to prevent the leakage drops, high efficiency, a glue line. Easy fatigue, no waste, uses a wide range, the product is complete,
     6, according to user needs, with different sizes and kinds of syringes, needles Tsui is the user the best partner.
     Index parameter:
     Power Supply: AC 220V ± 10% / 50Hz Power consumption:
     Air Source: Max 0.99MPa (clean and non-lubricated dry air)
     Spit Pressure adjustment range: 0.05MPa-0.7MPa
     Spit time adjustment range: 0.01S--30S, adjustable DIP switch combination of the program,
     Multi-time mode function mode: Manual mode / Automatic mode vacuum suck back function:
     Spit Frequency Accuracy: ± 0.05% Frequency: 600 times / min
     Minimum spit quantity: 0.01ml
     Dimensions: 270mmx165mmx140mm