name:kenny
tel:008613424376946
msn:kenny03152 at hotmail com
email:kenny at obdmaster com
Features
Working with a computer, this item performs the functions of a factory VAG-155X or VAS-505X scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions

◆ Full support for control modules using the new "Service 22" identification methods.
◆ Support for control modules using the new UDS/ODX/ASAM protocol. The following functions are supported:
Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.
◆ New Session Log capabilities.
◆ Support for Generic OBD-II Mode 10.
◆ Support for vehicles with dual ECUs, or example the RS4 and W12 engines. Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
◆ Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
◆ Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
◆ New internal Gateway Coding Assistant (required for Audi B8 platform cars).
◆ Much improved documentation (Label Files) for many older cars


Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules (most models through 2002)
Adaptation - read/reset Service Light parameters, view/change block learn values
Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?
This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications
OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Color: Black
Powered from car battery by OBD2 connector