Geocell production line

Geocell is formed by extruding the macromolecule polymer into sheet, and punching the sheet, then power welding. It can stretch and retract freely, and can be folded during transportation. During the application, it is possible to fill rock or concrete materials, and form honeycomb structural.

It can be applied as cushion layer to treat soft foundation, and increase the loading capacity of foundation. It is also possible to pave on the slope to constitute the slope protective structure. Moreover, it can also be applied to construct the supporting and retaining structure, etc.

Geocell is a network chamber structure shaped by high-strength HDPE broadband through welded. It is flexibility and can be stacked together when transportation. And it can be filled with earth and stone or concrete materials when open, forming a strong side with a degree of restriction and large steel structures. It can be used as a cushion to deal with weak foundation increasing the carrying capacity of the foundation and can also be laid on the slope constitute slope to protect structures, can also be used to build retaining structures.
1.       It is flexible and can shrink stacked in transportion, in the process of the construction it can be tensioned into the network. It can be filled with soil, gravel, concrete and other loose material, forming a strong lateral stiffness of the structure of constraints and large body.
2.       The material is light, resistant to abrasion, chemical performance is stability, resistant oxygen aging, acid and alkali. It is suitable for different conditions of soil and desert soil.
3.       Higher side constraints and non-slip, anti-deformation, the effective enhancement of the subgrade bearing capacity and dispersed loads.
4.       It can change geocell height, distance and other geometric welding of different sizes to meet engineering requirements.
5.       It is flexible and the transport volume is small, facilitate to connected and the construction speed is fast