YZ18JG vibratory roller is a heavy-duty self-propelled vibratory roller, which is mainly suited for compaction during the engineering construction of high-class highways, airports, harbours, dams and industrial yards. Also lends itself to be used on the large-scale base course, sub-base and embankment fill compaction.
YZ18JG vibratory roller applies the following described characteristics on its structure and performance: articulated beam-frame, power shift gearbox, 3-level electrical shifter on forward and reverse, closed hydraulic vibrating system, 3-level vibration damper and hydraulic articulated steering system, etc.
Working mass(Kg):18000
Mass distributed on front drum(Kg):8700
Mass distributed on rear drum (Kg):9300
Static linear load(N/cm):390
Speed range(Km/h)
I speed:2.86
II speed:5.3
III speed:9.7
Theoretical gradeability(%):30
Min. outer turning radius(mm):6500
Min. ground clearance(mm):385
Max. shell protuberating (mm):120
Steering angle:±34°
Swinging angle:±11°
Vibrating frequency (low/high)(Hz):28
Nominal amplitude @ low/high fre.(mm):2.1/1.0
Centrifugal force @ high/low amp.(kN):330/190
Vibrating drum diameter(mm):1523
Vibrating drum width(mm):2178
Engine
Model:D6114ZG
Type: water-cooling,supercharged
Max.power @ 1800r/min(kW):115
Rated speed(r/min):1800
BD10 power gearbox
Pressure(Mpa):1.6
Total length(mm):5610
Total width(mm):2370
Total height(mm):3160