1. Fixed rail, no need to adjust the rail, feed screw very stable, very easy to operate, especially suitable for small thin cap screws, popular in mobile and digital products assembly line.

2. Analog of Sony series screw feeder, but with very competitive price

3. When you pick up screws, there is no need to pay special attention to the screw head position, you just need put the screw driver tip into the guide bearing, slide along the guide bearing, and pull down the screw towards your body position.

4. Compared to traditional screw tray, the machine can save 1.4 seconds each time to improve the productivity efficiency four times; 

3. No need to align the screw, just need to put batches of screws into the loading space; 

4. Widely used in various types, length and head shape of the screw; 

5. The shape of the screw head can be simply adjusted by the external controller unit; 

6. Compact design, save working space, one worker can operate several machines at the same time; 

7. With a machine overload protection circuit and reverse power polarity prevent circuits.
New models:

Models			Item	Nominal diameter	Screw length
minimum length					maximum length
single		with spring washers	with spring and washer	buried
EK-140II			ф1.4	1.4		-	-	1.8	18.0
EK-170II			ф1.8	1.6		-	-	2.2
EK-200II			ф2.0	1.8		3.0	5.0	2.5
EK-230II			ф2.3	2.5		4.0	5.0	2.8
EK-260II			ф2.6	2.8		4.0	6.0	3.5
EK-300II			ф3.0	3.0		4.0	6.0	4.0
EK-400II			ф4.0	4.0		6.0	8.0	5.0

Old models: