FE1/10(100) BaseT converter adopts telecom line (E1 or E1 transmitting network, such as PDH, SDH, microwave, etc) to extend Ethernet. It converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it  effectively used the spare bandwidth of telecom providers, it saves the networking cost and improves the efficiency and can be used immediately.

Techonology Characteristic:

  Realizes Ethernet data transmission of transparence or fraction time-slot in E1 line, bandwidth ranges from 64Kbps-2048Kbps

  Support Ethernet auto-negotiation and full/half duplex function

  Support MDI/MDI-X auto-sensed

  Support to transmit the extra long frames regulated by IEEE 802.1Q; support Ethernet switch with VLAN function

  Support data frame filter at local side

  Provide unbalanced 75Ω and balanced 120Ω  E1 interface

Interface Parameters:

E1 Port:

  Comply with ITU-T G.703\G.704

  Code Pattern: HDB3 code

  Rate: 2048Kbps±50ppm

  Interface: 75Ω BNC / 120Ω RJ45

Ethernet Port:

  Comply with IEEE 802.3(2000) standard

  Rate: 10Mbps or 100Mbps

  Interface: RJ45

Working Conditions:

  Power supply: AC 220V±20%

  Power Consumption: <5W   

  Environment Temperature:0-50^oC