Tent introduction 
  : Tent composition
   1 Fabric:
    (1)The technique target of waterproof is by the level standards, only to brush AC or PU for Spill-resistant ,General for

Children or games tents. Waterproof 300MM, General for sand beach tent/ sun-shading tents or cotton fabric uses in droughty

area.Waterproof 800mm-1200mm, general for ordinary camping tents.Waterproof 1500mm-2000mm , general for medium-price point

tents and travelling for several days.Over waterproof 3000MM, general for professional tents, adopting high temperature

resistant and low temperature resistant technique processing.Bottom Fabric: Common for adopting PE, It is important to

compare the quality by thickness and density. The better or high-class uses Oxford fabric, with waterproof processing 1500mm

at least.
The inner fabric is adopting ventilate nylon and ventilate cotton Fabric. The quality is only based on its density
 (2)Bracing framework
The most common is fiberglass pipe
it is more professional and oppositely important to measure the quality
The sorts of bracket:
1. spring-steel: Common for child tents or sand beach tents.
2, The most common is fiberglass pipe including the series of 6.9/7.9/8.5/9.5/11/12.5.The cruder, the more rigid, the less

smooth. To choose bracket of fiber pipe reasonably is based on proportion as the sizes and height of ground, it is easy to

snap whatever thicker or thinner. In stance, The standardizing size proportion is 210*210*130, universally with pipe 7.9 or

8.5 3, Aluminium alloy framework: it is upmarket, hard to test according to alloy mixture ratio,, by heat pressing shaping

after counting its original bracket complete radian Curve normally. The feature is easy-taking, hard to snap, however, it is

easy to be bending deflection.
NO:B5023
Size:150*100*80cm
Outsheet:170T Polyester
Water Pressure:PA350mm
Floor:170T Polyester
Spring steel:8*1.6mm
N.W/G.W.:18/20kgs
Meas:70*70*34cm/12pcs Out door tents specification could be ordered as the request