The UMT1100A digital video broadcasting terrestrial receiver set-top box(DVB-T STB) from Unionman Technology is an advanced, fully featured digital receiver equipped with Fujitsu 86H20B chipset, which compliant with DVB-T COFDM and MPEG2 standard.
The STB can wireless receive terrestrial digital TV signal which is over the air with 3.7 to 23.8Mb/S rate in VHF or UHF frequency band. The box with 6MHz, 7MHz and 8MHz bandwidth optional and power off memorization, EPG function. And it has the automatic searching function which receive the DVB-T signal more convenient.
The UMT1100A applies the newest software and hardware combination technology to make sure its long and stability operating.
Furthermore, the UMT1100A which is with streamline appearance. All functions can be operated in the front panel.

Features:
 Powerful single-chip resolve solution Fujitsu 86H20B/20C
 MPEG-I, MPEG-II.
 Fully DVB-Tstandard
 Irdeto CA or Conax CA support
 6MHz, 7MHz & 8MHz software setting
 Teletext support
 Automatic, Manual or Easy installation
 1000 programs
 Parental Lock Control
 EPG support, display current or next program information and weekly information
 RF modulator support
 S/P DIF out support
 S-VIDEO signal output
 Software upgrade via RS-232 serial port
 PAL/NTSC automatic distinguish

Tuner:
Output frequency: 174~860MHz
Input Signal level: -72~-20dBmV
Input Impedance:75Ω
Bandwidth: ※8M,6M
Channel decoding:
Standard: DVB-T
Demodulation: QPSK, QAM16, QAM64
Mode: 2K, 8K
Gap protection: 1/4，1/8，1/16，1/32
Code Rate: 1/2，2/3，3/4，5/6，7/8
De-multiplexer:
Standard: ISO/IEC13818-1
Max Input bit Rate: 60Mbps(serial)/7.5MBps(parallel)
Video decoding:
Standard: ISO/IEC1318-2，MPEG-2MP@ML
Video mode: 4：3，16：9
Audio decoding:
Standard: ISO/IEC13818-3
Sound decoding: MPEG-1&MPEG-2layerlandll
Channel mode: Left, right, stereo, Joint stereo
Volume: 24 level
Memory Information:
FLASH：2M/4M/8M
SDRAM:8M/16M/32M
EEPROM：8KB

Front Panel:
Digital display: 4 bit LED display channel, status
Key: Up, Down, Right, Left, Menu, Ok, Standby
Smart card slot: 1
Infrared inceptor: 38KHz
Smart card’s Read/Write machine:
Standard: ISO7816
Back panel:
RF input: F connector
Loop out: IEC male connector
RCA output: 6RCA(2left, 2 right, 2 video)
Y/C output: S-Video
RS232 serial port: DB-9 female connector
※TV SCART connector
※VCR SCART connector
※RF Modulator
※Feeder Antenna
※Digital audio output: S/PDIF( coaxial)

Power:
Input voltage: AC100~240V, 50/60Hz
Power Consumption: Max 15Wmax
Others:
Operating temperature：0~40℃
Net Weigh：1.5Kg