Parallel+Serial PCMCIA Card

Add a standard parallel port and standard serial port to any PCMCIA -enabled laptop, handheld, or desktop computer.

Introduction:

Many portable and hand-held computers do not provide a parallel port and serial port. HUIYA Hy-cp01 parallel & serial card is an ideal choice in these situations when a normal parallel interface and a RS232 interface is required.

The Parallel Port is currently being used in JTAG debug ,CPLD,FPGA cable download etc. the most common use is to provide a printer port when one is not provided by the PC. Parallel Port fully supports the IEEE 1284 NORMAL MODE standard, and functions exactly like a computers native parallel port. Thus, unlike the many USB to parallel converters on the market, PCMCIA Parallel Card will work seamlessly with any hardware or software that requires standard parallel port.

RS232 is a flexible, low-cost way to interface serial peripherals in a wide variety of portable ,PC-based mobile applications. They are also ideally suited for embedded systems, where achieving maximum functionality in a minimum of space is essential.

Features:

Add a Standard Parallel Port for Notebook PCs to connect printers and other parallel devices (JTAG chip programmers, data acquisition, machine process control, scientific measurement systems and software protection dongles).

Windows XP/2000/2003 auto-install (automatic installation with first insertion of the Card into PC Card slot) and few clicks - easy installation with Windows 9x.

Installs as a fully featured I/O mapped parallel port as LPT1, LPT2 or LPT3 . It map in at addresses of 378, 278 or 3BC.

Industry standard RS232 COM port with 16550 UART Standard decode for COM1 to COMn.

1 year limited warranty.

Specifications:

Bus Interface: PCMCIA type 2 interface , Release 8 and backward compliant

OS Support: Windows / 2000/XP/2003

Data Rate: 700 kbps (max)*

Ports: 1 Parallel Port plus 1 serial Port

Power Requirements: 25 mA @ +3.3 V