Product Features

Application

When an explosion occurs in an airbag or the SRS light is turned on accidentally, commonly the airbag controller should be replaced since the traditional tools cannot clear the trouble code. Actually, the controller can be used normally again after the trouble code is cleared, if there is no damage to the controller??s hardware. This item is used to reset the airbag.

Functions

Airbag resetting

Anti-theft code reader

Features

Big display screen, quick and convenient.

Read/write and save the memory of the airbag currently not supported.

VW airbags can be restored by K-line and OBD-II line.

Applicable Vehicles for Anti-theft Code Reader

Applicable to Volkswagen vehicles. It can quickly read out the anti-theft code. Without this code reader in hand, you have to get the anti-theft code through special maintenance station from VW manufacturer. Now with this code reader you can read out the code quickly. So this is a very useful function.

Resetting Vehicles not Listed
This is a very important feature! There are so many airbag models in the world that it is impossible to get airbag data for all airbag models. With this function, user can perform airbag resetting for most vehicles not listed in the above table by the following simple steps. This function is applicable to vehicles use chip model 93C46, 93C56, 93C66, 24C01A, 24C04, 24C08, 25160, 25320, 95080, and nonstandard 93C46.

1.To reset an airbag not listed in the above table, you just need to find a good airbag with same type;

2.Install the good airbag chip onto the adapter, and connect the adapter to this item;

3.Select chip type and press F1 key. This item will read and save the data of the good airbag chip automatically;

4.Take out the good airbag chip and insert the crashed airbag chip onto the adapter, and then press F2 key. This item will write the stored data into the crashed airbag chip automatically.