Pipe bending 

The pipe bending is used to change the direction of run of pipe.it advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design. usually,the bends consist of 3D,5D,7D even 12D series..

Pipe elbows 

Pipe elbows are used to be installed between two lengths of pipe or tube allowing a change of direction,usually these elbows distinguished by connection ends.

Elbows are categorized based on various design features as below:

Long radius (LR) pipe elbows >>

• L/R 45°Elbow, 45 degree long radius elbow
• L/R 90°Elbow, 90 degree long radius elbow
• L/R 180°Elbow, 180 degree long radius elbow

Short radius (SR) pipe elbows >>

• S/R 45°Elbow, 45 degree short radius elbow
• S/R 90°Elbow, 90 degree short radius elbow
• S/R 180°Elbow, 180 degree short radius elbow

The ends of pipe elbows may be machined for butt welding , threaded , or socketed , so the elbows are consist of butt weld,thread elbow, socket elbow and other series.

Pipe tee, Tee fittings 

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. Let us know more about pipe tees under the following heads:

+ Stainless Steel Tee

+ Barred Tee

+ Equal tees

+ Reducing tee

Pipe Cross, Cross fitting >>

A pipe cross is a kind of pipe fitting. It is used in the place where four pipes meet together.

• Reducing cross, Reducing cross fitting
• Equal cross, Equal cross fitting Y type pipe cross sections
• Saddle previously   Saddle previously DIN2618
• Standard: ANSI B16.9/B16.28, MSS SP-43/SP-75

Pipe cap, Cap fitting 

Pipe cap is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line. We also use caps to cut off the transition and the connection treat can be butt weld,socket weld and thread conection according to use requirements.

Reducer, Pipe reducer 

A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). 
A reducer can be used either as nozzle or as diffuser depending on the mach number of the flow.