Function description

The Q-lane is used to check vehicles side slip, brake and suspension.The system combined roller brake tester, suspension tester, sideslip tester and control center
(PC based cabinet). It is suitable for vehicles less than 3,000kg/axle. The system
is well accepted by garages and inspection stations as well. Customized configuration is available. It is easy to installed and space saving.


General specification

Q-Lane includes a roller set brake tester, a suspension tester, a side slip plate and a control console. With bridges and ramps, the V-Lane can be installed above floor.

Axle load allowed 3,000 kg(we also have 10,000kg/axle for alternative)

Side slip testing range ±10 mm/m

Side slip testing accuracy ±0.2 mm/m

Brake force testing test speed 2.19 km/h

Brake force testing range 0-12,000 N

Brake force testing accuracy 2% F.S.

Suspension vibration amplitude 6 mm

Suspension Vibration frequency >15Hz

Suspension testing accuracy 2%

Operation temperature 540 C

Operation humidity <95% (no condense)

Compress air supply 0.6-0.9 MPa

Power supply: 380V, 50Hz (other power supply available)


Configuration

Side slip tester Model: SSP-3

Plate dimension: 700(L)X600(W)

Roller brake tester, Model: BKR-3

Roller diameter 200 mm

Roller spacing 380 mm

Roller surface Ceramic

Maximum track length 750 mm

Minimum track length 2150 mm

Motor 4X2.2 kW

Pneumatic lifter between rollers

Suspension tester Model: SUP-3

Plate dimension 650X400 mm

Motor Power 2X2.2 kW

Cabinet and electronics Model: Ts

Cabinet Powder spay steel control cabinet, with standard keyboard, mouse, 15 color CRT

Bus half ISA

Expansion bus PC/104

CPU Celeron M 800M CPU

IC group Intel 852GM+ICH4

Memory >= 128M

BIOS AMI BIOS

LAN 1X10/100M ether,1XRJ45 port

IDE controller UltraATA 66/100 IDE

Prot multi I/O, 1XFDD2XUSB1XSPP/EPP/ECP, 3XRS232, 1XRS232/422/4851XPS/2, 1XPS/2

Static electronic disk and Compact Flash slot

Printer A4 LaserJet

Operation system: Windows

Software Q-lane