submersible sludge pump

submersible sludge pump
Model:NSQ50-21-11
Brand:dingnuo
Origin:Made In China
Category:Industrial Supplies / Machinery / Pumps Vacuum Equipment
Label:submersible sludge p
Price: ¥18000 / pc
Min. Order:1 pc

Product Description

NSQ submersible sludge pump is hydraulic machinery, the motor and the pump of which are coaxially submerged in medium to work. The overflowing parts of the pump are made from high alloy wear-resistant material, so the pump has good wear resistance and large flowing passage. It is applicable for conveying media such as sludge, ore slurry, coal slurry, sandstones containing big solid particles. The product is designed and manufactured by domestic and oversea advanced technologies. Besides the main impeller, the bottom of the pump is additionally provided with a set of agitation impeller which can spray the deposited sludge into turbulent flow, and therefore the pump realizes high-concentration conveying under the condition of no auxiliary device. The unique seal device can effectively balance the pressure inside and outside the oil chamber, so as to protect the reliability of the mechanical seal to the maximum extent. The motor adopts various protective measures such as overheat protection, water inle t detecting protection, and can operate safely for a long term in harsh working conditions.
The pump is applicable for pumping sand for building, silty sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc.
Structural Property
1.The whole machine is dry submersible pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities are effectively prevented from entering inner cavity of the motor.
2.Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out.
3.The trans-flux parts such as the impeller and the agitation impeller are made from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass.
4.The motor is submerged in water, is not limited by suction stroke, and has high sludge suction rate and thorough desilting.
5.The integral device is simplified, needs no auxiliary stirrer device or ejector device, and has simple and convenient operation and low total investment of the unit.
6.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium.
Use Conditions
1The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor.
2
The temperature of the medium cannot exceed 60, and the medium does not contain inflammable or explosive gases.
3
The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%.
4
The submerged depth of the unit is not more than 20 meters, and the minimum submerged depth takes submerging of the motor as reference.
5
The unit works in the medium vertically, and the working status is continuous.
submersible sludge pump 1submersible sludge pump 2submersible sludge pump 3

Member Information

Jinan jing Dingnuo pumps co.,ltd
Country/Region:Shan Dong - China
Business Nature:Manufacturer
Phone:18660157227
Contact:sabrina song (Business)
Last Online:05 Mar, 2012