Smart Battery Charger&12V Car Battery Charger

Model:	G60-12A
Brand:	Green
Origin:	Made In China
Category:	Electronics & Electricity / Battery, Storage Battery & Charger
Label:	12V Lead-Acid charge , Golf cart charger , e-bike charger
Price:	US $11.5 / pc
Min. Order:	500 pc

Inquire Now

Product Description

G60-12A 12V Car Lead Acid Battery Charger with Battery Meter

Specification
Input: 100~240V
Output: 13.8V 3.3A
Charge Process: MCU Control, With Recovery Function
Charger Indicator: With 20%~100% Battery Fuel Gauge
Output Protections: Short-circuit, Reverse Polarity
Safety Approval: CE cUL
Size: 120 x 67 x 41mm
Suit for Battery: 12 Volt 4~40Ah Lead-Acid Battery Charger

G60-12A is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for lead-acid type battery charging. G60-12A programmed four auto stages (Ud-Im-Uo-Up) charging process, It is designed for all kinds of 12V 7~80Ah lead-acid battery, such as SLA, AGM and Gel battery. Stage "Ud" desulfurating the battery through 18V pulse，When the battery recovered, stage "Im" will give bulk current charging( 3.3A or 2.0A). Then, "Uo" stage is followed, the output voltage is limited on 14.7V; When the battery is nearly full, stage"Up" will turn on duty. At this stage, the battery is charged completely and the charger give some pulse to maintenance the battery.

Further, G60 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.

For more safety, G60 will inter protection mode when the battery polarity reversed or the output connectors shorted.

Specification for G60-12A

Input Voltage	100-240VAC, 50-60Hz
Input Current	1.1A
Back current drain	1.3mA
Charge voltage	Rating 12V, Bulk limited voltage : 14.7V
Ripple current	Current-ripple:<= 0.13A rms
Bulk charge current	3.3A for G60-12A, 2.0A for G60-12AS
Operate Temperature	-20℃~50℃
Cooling	Natural convection. Do not cover the charger.
Charge principle	Auto 4 stages: Ud-I-Uo-Up
Battery type	All types of 12V lead-acid batteries.( SLA, Gel, AGM….)
Battery capacity	7-80Ah for G60-12A, 4~40Ah for G60-12AS
Size	120X67X41mm
Enclosure	IP54 (Dust protected, Water splashing resistance)
Weight	270g

How to use:

1. Connect the AC cord to the socket, The "power" lamp will light on RED.

2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, all lamps will flashing, please check the setup.

3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.

The table shows the duration of the Bulk stepup to about 80% state of charge.