Product description of hydraulic trimming and shaping machine for aluminum magnesium die castings:

Mainly used for; Metal stamping, bending and plastic material pressure processing of parts, thermosetting, powder metallurgy, inductance and ceramic powder pressing.

Aluminum magnesium die-casting products can also be used for trimming and shaping of raw edge riser, and also for plastic products.

Stamping, printing, extrusion, punching, punching, bending, riveting, riveting, press fitting, combination, forming and other processes of metal or non-metallic parts

1. The vertical four column or c-type structure is adopted, the four column guide sleeves are lengthened, and the movable formwork is thickened and strengthened, and the CNC gantry milling floor boring and milling processing is adopted, which has high precision, high strength, and achieves accurate trimming and shaping.

2. The top mounted design of the oil tank is adopted, which has a beautiful appearance, reduces the loss of pipeline connection, and saves the floor space. A waste truck can be placed under the machine platform for sanitation and cleaning.

3. A ladder type work and maintenance platform shall be installed to facilitate maintenance personnel to overhaul the machine.

4. Closed metal safety doors are installed on four sides, and openable protective doors are installed on the left and right sides to facilitate mold installation.

5. It is equipped with automatic air blowing to facilitate the cleaning of knife edge tools, manual lubrication or automatic lubrication system.

 

5. Aluminum alloy die-casting island hydraulic trimming machine five fold safety protection:

(1) The hydraulic circuit is equipped with a back pressure valve to prevent the oil cylinder from sliding.

(2) Equipped with pneumatic or (hydraulic) anti drop device, only the cylinder or oil cylinder can pull out and close the mold.

(3) Install reliable and safe infrared grating. Objects or operating days block the infrared ray to stop the mold closing action or return to the upper limit position

(4) Optional operator can install up and down movable safety door

(5) All four column openable safety doors are equipped with sensors, and the machine stops when the door is opened

6. Use domestic or imported hydraulic element seals to ensure no oil leakage, low energy consumption and low noise (brands, European, Japanese and American can also be selected

7. It is controlled by domestic or Japanese or European PLC, and equipped with human-computer interface to facilitate the commissioning of various parameters. It is very simple to maintain and use

Modular design of die interface:

The core pulling interface is modularized, equipped with quick connectors, which can be connected as required

Modularization of water cooling pipeline

Modularization of the mould temperature machine pipeline

Modularization of vacuum lines

Modularization of point cooling pipeline

8: Die casting island automatic hydraulic trimming machine can be equipped with:

(1) Mobile receiving tray

(2) Number of reserved core pulling groups

(3) Top bar or bottom bar

(4) Turning angle in column (0-125 °)

(5) Clamping device/mold lifter, mold moving arm

(6) Mobile turning (angle 0-180 °)

(7) Operate the front moving safety door up and down

(8) Servo hydraulic system can save more than 60% energy

(9) Add embedded heating pipe, mold temperature machine and water cooler to control mold heating and cooling

(10) Vacuum system can be installed as required