Mitutoyo sfsk388 Mitutoyo digital video card 0-300mm/0.01 detailed instructions
Brand: Mitutoyo/ Mitutoyo
Model: sfsk388
Type: electronic digital caliper
Measurement range: 0-300mm/0.01mm
Resolution: 0-300mm/0.01
Read value: 0-300mm/0.01mm
Processing custom: Yes
Material: stainless steel
A detailed description of "Mitutoyo sfsk388 Mitutoyo digital video card 0-300mm/0.01":
Japan's Mitutoyo Mitutoyo super hard alloy number display size 500 Series
ABSOLUTE Digimatic caliper
500 series - using the unique ABSOLUTE encoder technology.
Mitutoyo absolute origin type Digimatic is a new generation of electric calipers
Sub caliper products. It can be in the set of the origin of the
Line continuous tracking. No matter when the boot, large liquid crystal display
The display screen will display the current Vice ruler position, so that at any time.
To measure. The absolute zero point encoder technology is adopted.
Need to repeatedly adjust the zero, it will not produce the wrong speed.
Characteristic
Large clear liquid crystal display.
Can be adjusted to zero through the ZERO/ABS key at any sliding block position,
By comparing the measurement results as in. This switch can also be returned
Back to the absolute origin (ABS) coordinate position and display the distance from the original
The actual position of the point (usually for the closing point of the measuring jaws).
? can provide the data holding device (959143).
? provide callipers with hard alloy head claw. .
performance parameter
Metric type
The measuring range of item note (depth measuring rod adjusting roller / thumb / other)

0 - 500-150-20 1.9mm 100mm rod with thumb adjustment roller-
0 - 500-180-20* 100mm? 1.9mm bar -
0 - 500-151-20 150mm sheet with thumb adjusting roller-
0 - 500-154-20 150mm sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 500-155-20 150mm sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 500-158-20 1.9mm 150mm rod with thumb adjustment roller-
0 - 500-181-20* 150mm sheet -
0 - 500-152-20 200mm sheet with thumb adjusting roller-
0 - 500-156-20 200mm sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 500-157-20 200mm sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 500-182-20* 200mm sheet -
0 - 500-153 300mm sheet with thumb adjusting roller-
0 - 500-500-10 450mm --
0 - 500-501-10 600mm --
0 - 500-502-10 1000mm --
* without SPC data output
Inch / metric type
The measuring range of item note (depth measuring rod adjusting roller / thumb / other)
0 - 4 "3/40? 500-170-20" rod with thumb adjusting roller-
0 - 4 "3/40? 500-195-20*" rod with thumb adjusting roller-
0 - 6 "500-171-20 sheet with thumb adjusting roller-
0 - 6 "500-174-20 sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 6 "500-175-20 sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 6 "3/40? 500-178-20" rod with thumb adjusting roller-
0 - 6 "500-196-20* sheet with thumb adjusting roller-
0 - 6 "500-159-20* sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 6 "500-160-20* sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 8 "500-172-20 sheet with thumb adjusting roller-
0 - 8 "500-176-20 sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 8 "500-177-20 sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 8 "500-197-20* sheet with thumb adjusting roller-
0 - 8 "500-163-20* sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 8 "500-164-20* sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 12 "500-173 sheet with thumb adjusting roller-
0 - 12 "500-167 sheet with thumb adjusting roller for external diameter measurement of hard alloy head
0 - 12 "500-168 sheet with thumb adjusting roller for measuring the diameter and diameter of the hard alloy head
0 - 12 "500-193* sheet with thumb adjusting roller-
0 - 12 "500-165* sheet - hard alloy head for external diameter measurement
0 - 12 "500-166* sheet - hard alloy head for measurement of outside diameter and inside diameter
0 - 18 "500-505-10 - with thumb adjusting roller-
0 - 24 "500-506-10 - with thumb adjusting roller-
0 - 40 "500-507-10 - with thumb adjusting roller-
* without SPC data output
ABSOLUTE coolant caliper
500 series - to achieve IP66/67 dust / water protection standards
Characteristic
Can be exposed to cooling liquid, water and dust in the workshop environment.
Use in oil or oil.
Easy to use, no need to wipe the ruler.
Advanced design style.
Integrated absolute origin type measuring system.
Automatic power on / off.
Data output function.
technical parameter
Accuracy: + 0.02mm (measurement range is less than or equal to 200mm model)
0.03mm (measurement range than 200mm model)
(excluding quantization errors)
Resolution: 0.01mm or /0.01mm ".0005
Repeat accuracy: 0.01mm
Display: liquid crystal display
Length standard: ABSOLUTE electrostatic capacitance linear encoder
Maximum response speed: no limit
Battery: SR44 (1 / 2 *), 938882
Battery life: about 3 years under normal use
(measurement range is greater than 300mm model for 1 years)
Dust and water protection level: to achieve IP66 or IP67 protection standards
* measurement range 0-300mm model
function
The origin, set zero, auto power on / off data output / inch
Metric conversion (inch / metric type)
Warning: low voltage, calculation error
Option
05CZA624: with data