CORTEN-A Steel Plates S355JOWP EN10025-5

CORTEN-A Steel Plates S355JOWP EN10025-5
Model:CORTEN-A Steel
Brand:CORTEN-A Steel Plates S355JOWP EN10025-5
Origin:Made In United States
Category:Construction & Decoration / Building Steel & Structure
Label:CORTEN-A Steel Plate , S355JOWP Steel Plate , S355J0WP Steel Plate
Price: -
Min. Order:-
Inquire Now

Product Description

CORTEN-A Steel Plates S355JOWP EN10025-5 

CORTEN Steel Grade-A / CORTEN Steel Grade-B / S355JOWP / S355JOWP+N / S355J2WP / S355J2WP+N / S355JOW / S355JOW+N / S355J2W / S355J2W+N / IRSM41-97 / IRS-M41 / IRSM-41 / JIS G3125 SPA-H ATMOSPHERIC CORROSION RESISTANT STEEL / WEATHER RESISTANT STEEL SHEET, PLATE, COIL, COLD ROLLED STEEL SHEET, PLATE, COIL & HOT ROLLED SHEET, PLATE, COIL ASTM A423, ASTM A847 WELDED TUBE, ERW TUBE, SEAMLESS TUBE, PIPE, ROUND PIPE, SQUARE PIPE, RECTANGULAR PIPE 


Scope   
COR-TEN A applies to plates up to 12.5 mm in thickness, COR-TEN B applies to plates up to 50 mm in thickness.   

Definition   
Weathering means that due to their chemical compositions COR-TEN A and COR-TEN B steels, when utilized unprotected, exhibits increased resistance to atmospheric corrosion compared to unalloyed steels. This is because it forms a protective layer on its surface under the influence of the weather.   

Applications   
The steel is used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions.   
Basic guidelines for the use of this steel in the unprotected condition are described in EN 10025-5 and DASt rule 007.   

Chemical Composition (heat analysis, %)   
 

Grade C Si Mn P S Cr Cu V Ni
COR-TEN A 0.12 0.25-0.75 0.20-0.50 0.07-0.15 0.030 0.50-1.25 0.25-0.55 - 0.65
COR-TEN B 0.16 0.30-0.50 0.80-1.25 0.030 0.030 0.40-0.65 0.25-0.40 0.02-0.10 0.40
 



In order to obtain fine grain structure a sufficient amount of nitrogen absorbing elements is added (e.g. ≥0.02% Al).   

Mechanical Properties, in the state of delivery condition   
At room temperature for plates ≥3mm in thickness (transverse test specimans, according to EN 10002). Requirements to hot rolled plates ≤3mm in thickness according to EN 10025-5.   
 

Grade Minimum yield point (ReH Mpa *) Tensile strength Rm MPa Minimum elongation A (Lo=5.65 √So) %
COR-TEN A 355 470-630 20
 


*) 1 Mpa = 1N/mm2   

In case of cold rolled material the yield point is min. 310 Mpa and the tensile strength min. 445 MPa. Furthermore cold rolled sheets ≤3mm in thickness made of steel grade COR-TEN A-F for increased demand to the cold formability is available.   

Mechanical properties:

  • Yield point min. 275 Mpa
  • Tensile strength min. 410 Mpa
  • elongation min. 25%
  • Tolerances on dimensions and shape according to EN 10131.


 

Grade Material thickness mm Minimum yield point (ReH Mpa *) Tensile strength Rm MPa Minimum elongation A (Lo=5.65 √So) %
COR-TEN B ≤16 355 470-630 20
≤16 345
 


*) 1 Mpa = 1N/mm2    

The notched-bar impact energy is determined on ISO-V longitudinal test specimens at a temperature of - 20°C as an average of three tests. For product thicknesses ≥10mm the average value is at least 27 J. For thicknesses between 10mm and 6mm, the minimum impact value is reduced proportionally to the specimen width (product thickness).   

No impact test is performed on products below 6mm in thickness.    

Number of Tests

  • 1 tensile test
  • 1 test specimen per 40 t from each heat*)
  • Notched bar impact test
  • 1 set specimens per 40 t from each heat *)
  • (3 specimens) (at test temperature -20°C)


*) as referenced in EN 10025-5   

EQUIVALENT SPECIFICATIONS   
 

Material # EN 10155 SEW 087 NFA 35-502 UNI BS 4360 UNE ASTM JIS G3114
1.8961 S235J2W WTSt 37-3 E 24 W 4 Fe 360 DK 1 - - - -
1.8945 S355J0WP E 36 WA 3 Fe 510 C1K1 WR 50 A - - - -
1.8946 S355J2WP - E 36 WA 4 Fe 510 D1K1 - - A 242 Type 1 -
1.8959 S355J0W - E 36 WB 3 Fe 510 C2K1 WR 50 B - A 588 - A 242 Gr. 1 SMA 50 AW
1.8963 S355J2G1W WTSt 52-3 - Fe 510 D2K1 WR 50 C - A 588 Gr. A to
1.8965 S355J2G2W - - - - - - SMA 50 CP
1.8966 S355K2G1W - E 36 WB 4 - - - A 709 Gr. 50 W -
1.8967 S355K2G2W - - - - - - -
 



CORROSION RESISTANT AND WEATHER RESISTANT STEEL CAN BE ALSO SUPPLIED ACCORDING TO FOLLOWING STANDARD & SPECIFICATIONS :   

COR-TEN® A, COR-TEN®A, COR-TEN A, CORTEN-A, CORTEN A

COR-TEN® B, COR-TEN®B, COR-TEN B, CORTEN-B, CORTEN B

ASTM A588 Grade A, ASTM A 588 Grade-A, ASTM A-588 Grade A

ASTM A588 Grade B, ASTM A 588 Grade-B, ASTM A-588 Grade B

ASTM A588 Grade C, ASTM A 588 Grade-C, ASTM A-588 Grade C

ASTM A242 Type 1, ASTM A242 Type-1, ASTM A-242 Type 1 

S355JOWP EN 10025-5, S355JOWP EN10025-5, S355 JOWP EN-10025-5

S355JOWP+N EN 10025-5, S355JOWP+N EN10025-5, S355 JOWP+N EN-10025-5

S355J2W EN 10025-5, S355J2W EN10025-5, S355 J2W EN-10025-5

S355J2W+N EN 10025-5, S355J2W+N EN10025-5, S355 J2W+N EN-10025-5 

S355J2G1W EN 10155, S355J2G1W EN10155, S355 J2G1W EN-10155

S355K2G1W EN 10155, S355K2G1W EN10155, S355 K2G1W EN-10155

S355J2G2W EN 10155, S355J2G2W EN10155, S355 J2G2W EN-10155

S355K2G2W EN 10155, S355J2G2W EN10155, S355 K2G2W EN-10155

SAILCOR IRSM41, IRSM-41, IRS-M41, IRS-M41, IRS M41-97 FOR RAILWAY WAGON & CONTAINER

JIS G3125 SPA-H, JIS G3125-SPAH, JIS:G3125-SPA-H, JIS-G3125 Grade SPA-H, G3125-SPAH

ASTM A606 Type-2, ASTM A606 Type-4 High Strength with Improved Atmospheric Corrosion Resistance   


We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, P355N,  S355JO, High Temperature Service SA515 Grade 70, SA515 Grade 60, Low Temperature Service SA516 Grade 70, SA 516 Grade 60, ASTM A515 Grade-70, ASTM A515 Grade-60, ASTM A516 Grade-70, ASTM A516 Grade-60, SA537 Class 1, SA537 Class 2,  ASTM A537 Class-1, ASTM A537 Class-2, Hardox 400, Hardox 450, Hardox 500, Plates RAEX 400, RAEX 450, RAEX 500, FORA 400, FORA 450, FORA 500, ABRAZO 400, ABRAZO 450, ABRAZO 500, NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500, DUROSTAT 400, DUROSTAT 450, DUROSTAT 500, Dillidur 400V, Dillidur 500V, AR200, AR250, AR400, AR450, AR500, 200 HBW, 250 HBW, 400 HBW, 450 HBW, 500 HBW, 200BHN, 250BHN, 400BHN, 450BHN, 500BHN, TISCRAL, SAILHARD, JISCRAL Wear Resistant & Abrasion Resistant Steel Plates, ARMOX 500, ARMOX 500T, RAMOR 500, ARMOUR Plates for High Ballistic Protection, S690QL, S700MC, Dillimax 690T, Maxil 690, Naxtra 70, Supralsim 690, Weldox 700E, QstE 690 TM HSLA Plates, SAILMA 300, SAILMA 300HI, SAILMA 350, SAILMA 350HI, SAILMA 410, SAILMA 410HI, SAILMA 450, SAILMA 450HI, LRS Grade A, ABS Grade A, GL Grade A, DNV Grade A for Ship Building, AH-36, DH-36, EH-36, ASTM A36/A36M, IS-2062 Grade A, IS-2062 Grade B, SS400, S235JR, S275JR, S355JR, S355JO, S355J2, S355J2+N, S355J2G3, ASTM A283 Grade A, B, C, D, C-40, C-45, AISI 1045, C-60, C-70, EN-8, EN-9, AISI 4140, EN-19, AISI 4340, EN-24, S355JOWP / S355JOWP+N EN 10025-5:2004 DIN 1.8946 EN 10155 CORTEN-A, S355JOW / S355JOW+N EN 10025-5:2004 DIN 1.8963 EN 10155 CORTEN-B, S355J2W / S355J2W+N EN 10025-5:2004 DIN 1.8963 EN 10155 CORTEN-B
 


We mainly stock the Plates of following make : 

Azovstal Iron & Steel - Ukraine   
Alchevsk Iron & Steel - Ukraine   
ArcelorMittal Steel - Romania   
Thainox Steel - Taiwan   
Iscor - South Africa   
Salzgitter Mannesmann - Germany   
ThyssenKrupp Steel - Germany   
Dillinger - Germany   
Ruukki - Finland   
Corus - U.K   
Posco - Korea   
Indu Steel - France   
Indu Steel - Belgium   
SSAB - Sweden   
Kobe Steel - Japan   
JFE Steel - Japan   
Nippon Steel - Japan   

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3


Regards,

CONTACT PERSON :

 


MUKESH SHAH
Director    
Mobile No. 0091 - 9820292499    
Email - 
[email protected]


ROLEX METAL DISTRIBUTORS 
( A METAL & STEEL Company )    
57-A, KHATARGALLI,    
THAKURDWAR,    
MUMBAI - 400002, INDIA.    
TEL.No. 0091-22-23858802    
TEL.No. 0091-22-23823963    
FAX No. 0091-22-23898724    
Email - 
[email protected] 
Website – 
www.rolexmetals.com

    
 

CHAIRMAN – [email protected]

MANAGING DIRECTOR – [email protected]

TECHNICAL DIRECTOR – [email protected]xmetals.com

SALES DIRECTOR – [email protected]

COMMERCIAL DIRECTOR – [email protected]

 

COMMERCIAL MANAGER – [email protected]

GENERAL MANAGER – [email protected]

SALES MANAGER – [email protected]

PURCHASE MANAGER – [email protected]

TECHNICAL MANAGER – [email protected]

WORKS MANAGER – [email protected]

STORES MANAGER – [email protected]

WAREHOUSE MANAGER – [email protected]

SALES DOMESTIC – [email protected]

SALES INTERNATIONAL – [email protected]

SALES GENERAL – [email protected]

PURCHASE GENERAL – [email protected]

FINANCE MANAGER – [email protected]

ACCOUNTS MANAGER – [email protected]

GENERAL INFORMATION – [email protected]

 

EXPORT MANAGER – [email protected]

IMPORT MANAGER – [email protected]

AIR EXPORT – [email protected]

SEA EXPORT – [email protected]

CUSTOMS – [email protected]

 

AIR FREIGHT – [email protected]

SEA FREIGHT – [email protected]

DESPATCH – [email protected]

INSPECTION – [email protected]

LOGISTICS – [email protected]

TRANSPORT – [email protected]

 

KALAMBOLI WAREHOUSE – [email protected]

TALOJA WAREHOUSE – [email protected]

KHOPOLI WAREHOUSE – [email protected]

NHAVA SHEVA WAREHOUSE – [email protected]

KANDLA WAREHOUSE – [email protected]

MUMBAI WAREHOUSE – [email protected]

STOCKYARD – [email protected]

 

SERVICE – [email protected]

SUPPORT – [email protected]

RECRUITMENT – [email protected]

WEBMASTER – [email protected]

CUSTOMER CARE – [email protected]

 

PLATES / SHEETS / COILS / FLAT BARS    
Plates Sheets 1 mm to 300 mm thickness - Cold Rolled, Hot Rolled    
SA240 Grade 201, 202, 301, 304, 304L, 304H, 309, 309S, 310S, 316, 316L, 316H, 316Ti, 321, 321H, 347, 347H, 317L   
SA240 Grade 301LN, 304LN, 316LN, 317LN, 301 LN, 304 LN, 316 LN, 317 LN   
SA240 Grade 409, 409M, 410, 410S, 420, 430, 431 Soft Annealed, Full Hard, Half Hard   
AISI Type 309 UNS S30900, 309S UNS S30908, 309H UNS S30909, 310 UNS S31000, 310S    
UNS S31008, 310H UNS S31009, 310Si Din 1.4841, 309Si Din 1.4828 X15CrNiSi20-12 EN10095   
Uginox R20-12, Cronifer 2012, Avesta 4828, Outokumpu 4828, Din-1.4828 EN-10095   
SA387 Grade 2, 5, 7, 9, 11, 12, 21, 22 Cl.1, Cl.2   
Alloy Steel Cold Rolled Sheets ASTM A387 Grade-5, Grade-9, Grade-11, Grade-12, Grade-22, Grade-91   
Alloy Steel Cold Rolled Sheet / Coil SA387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22, Grade 91   
HSS AISI M2 DIN 1.3343 High Speed Steel Sheet, HSS AISI M2, DIN 1.3343 High Speed Steel Strip   
HSS AISI M-2 DIN 1.3343 High Speed Steel Sheet, HSS AISI M-2, DIN 1.3343 High Speed Steel Strip   
High Speed Steel Sheet SKH51, HS6-5-2, W6Mo5Cr4V2, DIN 1.3343, DIN 1.3339 AISI Grade M-2   
AISI M2 Sheet, AISI M-2 Sheet, AISI M2 HSS Sheet, AISI Grade M2 High Speed Steel Sheet, Strip   
High Speed Steel Cold Rolled Sheets / Coils / Strips Grade T1, M2, M35, M42   
Cold Work Tool Steel Cold Rolled Sheets / Coils / Strips Grade D2, D3, O1, O2, A2   
AISI D2 Sheet, AISI D2 Strip, DIN 1.2379 Sheet, DIN 1.2379 Strip, SKD11 Sheet, SKD11 Strip, HCHCr   
AISI D-2 Sheet, AISI D-2 Strip, DIN 1.2379 Sheet, DIN 1.2379 Strip, SKD-11 Sheet, SKD-11 Strip, HCHCr   
High Carbon High Chromium Sheet, Strip, Cold Work Tool Steel Sheet, Strip, AISI D2, Din 1.2379, SKD11   
Hot Work Tool Steel Cold Rolled Sheets / Coils / Strips Grade H11, H13   
Spring Steel Cold Rolled Sheets / Coils / Strips Grade EN45, EN47   
Bearing Steel Cold Rolled Sheets / Coils / Strips Grade EN31, 100Cr6, SAE52100   
HRPO Hot Rolled Pickled & Oiled Steel Sheets, Plates, Coils, Strips   
CRCA Cold Rolled Close Annealed Sheets, Coils, Strips, Slitting Coils   
CRFH Cold Rolled Full Hard Sheets, Coils, Strips, Slitting Coils   
CNC Plasma Cutting Sheets & Plates Profiles, Shapes as per Drawings & Specifications   
ASTM A36, IS 2062 Grade A, IS 2062 Grade B, SS400, S235JR, S275JR   
IS 2062 E250A (Fe 410W A), E250B (Fe 410W B), E300 (Fe 440), E350 (Fe 490), E410 (Fe 540), E450 (Fe 570)   
IS2062 E250A (Fe410W A), E250B (Fe410W B), E300 (Fe440), E350 (Fe490), E410 (Fe540), E450 (Fe570)   
IS 2062 E250 A, IS 2062 E250 B, IS 2062 E250 C, IS 2062 E250 Cu Copper Bearing, Cu-Bearing Steel   
IS 2062 E410, IS 2062 E450 D, IS 2062 E450 E, Copper Bearing Structural Steel for Corrosion Resistant   
ASTM A786 Hot Rolled Carbon Steel, Low Alloy Steel, High Strength Steel Chequered Floor Plates   
JIS G3134 SPFH 490, SPFH 540, SPFH 590 Hot Rolled High Strength Steel Sheet for Automobile   
JIS -G3134 SPFH490, SPFH540, SPFH590 Hot Rolled High Strength Steel Sheets for Automobile   
ISO 3183 L360, ISO 3183 L415, ISO 3183 L450, ISO 3183 L485, ISO 3183 L555   
IS 8500 Grade FE490B, IS 8500 Grade FE570B, IS8500 FE 490B, IS8500 FE 570B   
IS:1570 Part-4 15Cr13Mo6, 15CR13MO6 Nitriding Steel, 15Cr13Mo6 IS:1570-4, EN40A, EN40B   
15Cr13Mo6 Plate, 15Cr13Mo6 Plates, 15CR13MO6 Plate, 15CR13MO6 Plates, EN-40A/40B Plates   
SA572 Gr.50, ASTM A572 Grade 50, S355J2, S355J2+N, S355J2N, S355J0 EN10025   
SA573 Grade 58, SA573 Grade 65, SA573 Grade 70, SA573-58, SA573-65, SA573-70   
LRS (Lloyds Register) Grade-A, Grade-B, Grade-D, Grade-E Shipbuilding Plates   
ABS (American Bureau of Shipping) Grade-A, Grade-B, Grade-D, Grade-E Shipbuilding Plates   
DNV (Det Norske Veritas) Grade-A, Grade-B, Grade-D, Grade-E Shipbuilding Plates   
IRS (Indian Register of Shipping) Grade-A, Grade-B, Grade-D, Grade-E Shipbuilding Plates   
GL (Germanischer Lloyd) Grade-A, Grade-B, Grade-D, Grade-E Shipbuilding Plates   
AH-36, DH-36, EH-36 Approved & Certified by LRS, DNV, GL, ABS   
ASTM A131 Grade A, Grade B, Grade D, Grade E Shipbuilding Quality - SBQ   
ASTM A131 Grade AH32, Grade AH36, Grade DH32, Grade DH36 Shipbuilding Quality - SBQ   
ASTM A131 Grade EH32, Grade EH36, Grade FH32, Grade FH36 Shipbuilding Quality - SBQ   
ASTM A131 Grade AH40, Grade DH40, Grade EH40, Grade FH40 Shipbuilding Quality - SBQ   
SABS 1431:1987 Grade 240WA, 240WC, 240WDD Structural Steels   
SABS 1431:1987 Grade 300WA, 300WC, 300WDD Structural Steels   
SABS 1431:1987 Grade 350WA, 350WC, 350WDD Structural Steels   
SA36, JIS G3101 SS400, DIN 17100 St44-2, S275JR, DIN 17100 St37-2, S235JR   
SA283 Grade C, JIS G 3101 SS 400, DIN17100 ST44-2, S275 JR, ST 37-2, S235 JR   
SA 283/SA 283M Grade A, Grade B, Grade C, Grade D for Low and Intermediate Tensile Strength   
SA515 Grade 55, SA515 Grade 60, SA515 Grade 65, SA515 Grade 70, SA515 Grade 70N   
SA515 Grade-55, SA515 Grade-60, SA515 Grade-65, SA515 Grade-70, SA515 Grade-70N    
SA516 Grade 55, SA516 Grade 60, SA516 Grade 65, SA516 Grade 70, SA516 Grade 70N   
SA516 Grade-55, SA516 Grade-60, SA516 Grade-65, SA516 Grade-70, SA516 Grade-70N   
SA516/516M SA20/20M SA516 Gr.60/70 MT+LTV Normalized Impact Tested Vacuum Degassed   
ASME SA516 Grade 60/70 Fully Killed, Normalized, Vacuum Degassed for Boiler & Pressure Vessel   
ASME SA516-70MT LTV Normalized Condition SA516/SA516M Grade 70 MT LTV   
ASME SA516-70 HIC Tested according to NACE TM-0284 SA516 Gr.70 HIC   
ASME SA516 Grade 70 HIC (Hydrogen Induced Cracking) acc. to NACE TM 0284   
SA516 Grade 70 NACE MR-0175 HIC & SSCC Tested, SA516-70 NACE HIC+SSCC Tested   
SA516-70N Nace MR-01-75 HIC (Hydrogen Induced Cracking) & SSCC Tested   
SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003, NACE MR0175 / ISO 15156-2   
SA516 Grade 60/70 SSCC Tested Plates NACE TM0177-2005, NACE MR0103-2007   
SA516/516M Grade 60/70 Normalized & Impact Tested for Low Temperature Service   
SA515/515M Grade 60/70 acc. to SA20/20M Normalized for High Temperature Service   
SA-516-70 acc. to ASME II Part A Ed.2007, SA-516-70N acc. to ASME-II Part A Edition 2007   
ASME SA516/SA516M-07 MT LTV ASME SA20/20M-07 Made By BOF Process Vacuum Degassed   
SA516-70 MT LTV SA20/SA20M-07 Steel Making Process Basic Oxygen Furnace (BOF) + VD   
SA516 Grade 60/70 Normalized & Stress Relieved, Killed, Fine Grain, Charpy V-notch Impact Tested   
SA516-60/70 Low Sulphur 0.003% max Supplementary Requirements S1, S3, S5, S6, S12, S14, S17   
API 5L X42, API 5L X46, API 5L X52, API 5L X56, API 5L X60, API 5L X65, API 5L X70, API 5L X80 Plates   
API5LX-42, API5LX-46, API5LX-52, API5LX-56, API5LX-60, API5LX-65, API5LX-70, API5LX-80 Plates    
SA537 Cl.1, SA537 Class 1, SA537 Class-1, SA537 CL.I, SA537 Cl.I   
SA537 Cl.2, SA537 Class 2, SA537 Class-2, SA537 CL.II, SA537 Cl.II   
SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade   
ASME SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade   
ASTM A841 Grade B2, ASTM A841 Grade B-2, ASTM A841 Gr.B2, ASTM A841-B2 Grade   
ASTM A/ASME SA841 Grade B2 HSLA for Pressure Vessels Produced by    
Thermo-Mechanical Control Process (TMCP) A841/841M Grade B2   
HARDOX 400, HARDOX 450, HARDOX 500, RAEX 400, RAEX 450, RAEX 500, HB400   
FORA 400, FORA 450, FORA 500, ABRAZO 400, ABRAZO 450, ABRAZO 500, HB450   
NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500   
DILLIDUR 400 V, DILLIDUR 450 V, DILLIDUR 500 V, AR400, AR450, AR500, HB500   
CREUSABRO 4000, CREUSABRO 4800, CREUSABRO 8000, CREUSABRO M (HADFIELD)   
S690QL, MAXIL 690, NAXTRA 70, DILLIMAX 690T, SUPRALSIM 690, WELDOX 700E   
High Strength Steel Sheet, Plate for Cold Forming, Thermomechanically Rolled   
QStE 340TM, QStE 380TM, QStE 420M, QStE 500TM, QStE 550TM Sheets, Plates   
S315MC, S355MC, S420MC, S460MC, S500MC, S600MC, S650MC, S700MC High Yield Strength   
S700MC, DOMEX 500 MC, DOMEX 700 MC, DOMEX 100 XF, DOMEX 100XF, DOMEX XF-100   
SA514 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Structural Steel   
SA517 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Pressure Vessel   
SAILHARD, TISCRAL, JISCRAL, LAS07 Wear Resistant Steel Abrasion Resistant Steel   
TATA Steel TISTEN 52, TISTEN 55, TISTEN 55 SPL, IS 8500 Fe540B High Tensile Steel   
200 BHN, 250 BHN, 400 BHN, 450 BHN, 500 BHN Wear Abrasion Resistant Steel   
200 HBW, 250 HBW, 400 HBW, 450 HBW, 500 HBW Wear Abrasion Resistant Steel   
ARMOX 500, ARMOX 500T, RAMOR 500, ARMOUR For Ballistic Protection   
ARMOR Ballistic Steel MIL-A 46100 MIL-A12560 ARMOX 500T High Ballistic Protection   
MIL A-46100 MIL A-12560 MIL-A-46100 MIL-A-12560 High Ballistic Steel Armor   
Manganese Steel Plates X120Mn12 Din 1.3401, 12-14% Manganese   
Hadfield Steel Plates X 120 Mn 12 Din 1.3401, 11-14% Manganese   
SAILMA 300, SAILMA 300HI, SAILMA 350, SAILMA 350HI High Yield High Tensile Steel    
SAILMA 410, SAILMA 410HI, SAILMA 450, SAILMA 450HI High Yield High Tensile Steel   
300Mpa, 350Mpa, 355Mpa, 410Mpa, 450Mpa, 500Mpa, 550Mpa High Yield Strength Steel   
52ksi, 56ksi, 60ksi, 65ksi, 70ksi, 80ksi, 90ksi, 100ksi, 110ksi High Yield Strength Steel   
S355J2+N EN 10025, EN 10029 Table 1 Class A, B, EN 10163-2 Part 2 Class I, B Subclass 1   
S355J2G3 acc. to EN10025, EN10029, EN10163 Part 2 Normalized Vacuum Degassed   
S355J2G3 acc. to EN10025, S355J2G3 acc. to EN 10025, S355 J2G3 EN10025   
S355K2G3 acc. to EN10025, S355K2G3 acc. to EN 10025, S355 K2G3 EN10025   
S355JO acc. to EN10025, S355JO acc. to EN 10025, S355 JO EN10025-2   
S235JO acc. to EN10025, S235JO acc. to EN 10025, S235 JO EN10025-2   
S275JO acc. to EN10025, S275JO acc. to EN 10025, S275 JO EN10025-2   
S235JR acc. to EN10025, S235JR acc. to EN 10025, S235 JR EN10025-2   
S355JR acc. to EN10025, S355JR acc. to EN 10025, S355 JR EN10025-2   
S275JR acc. to EN10025, S275JR acc. to EN 10025, S275 JR EN10025-2   
ST 52-3 acc. to EN17100, ST52-3 acc. to DIN 17100 ST52-3 DIN 17100   
ST50-2, ST60-2, ST70-2 DIN 17100 ST 50-2, ST 60-2, ST 70-2 DIN17100   
EN 10025-3 Grade S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL   
EN 10028-3 Grade P275NH, P275NL1, P275NL2, P355N, P355NH, P355NL1   
EN 10028-3 Grade P355NL2, P460NH, P460NL1, P460NL2 FINE-GRAINED STEEL   
EN 10028-2 Grade P235GH, P265GH, P295GH, P355GH PRESSURE VESSEL STEEL   
IRSM44-97, IRSM-44, IRS-M44, IRSM-44/97, IRSM44 Stainless Steel for Wagons Corrosion Resistant   
IRSM44/97, IRS-M44, IRS M44, IRS-M-44-97, IRS M44 Utility Ferritic Stainless Steel for Railway Wagons   
SAILCOR IRSM41, IRS-M41, IRS M-41, IRSM-41 Weather / Atmospheric Corrosion Resistant Steel   
CORTEN A, B, C ASTM A242, ASTM A588, ASTM A871, ASTM A852, ASTM A441, IS 513   
CORTEN A, CORTEN B, CORTEN C, COR-TEN A, COR-TEN B, COR-TEN C Cold Rolled Steel   
Corten A Din 1.8946 EN 10025-5 S355JOWP, Corten B Din 1.8963 EN 10025-5 S355JOW S355J2W   
CORTEN-A / COR-TEN A Weather Resistant Structural Steel ASTM A 242 S355J0WP S355J0WP+N   
CORTEN-B / COR-TEN B Atmospheric Corrosion Resistant Steel ASTM A 588 S355J2W+N   
S355JOWP+N, S355JOW+N, S355J2W+N EN 10025-5:2004 Atmospheric Corrosion Resistant   
S355J2G1W EN 10155, S355J2G2W EN 10155, S355K2G1W EN 10155, S355K2G2W EN 10155   
JIS G3125 SPA-H, JIS G3125 SPAH, JIS-G3125-SPA-H, JIS:G3125-SPAH Sheet, Coil & Plate   
15Mo3 acc. to EN10028-2, 15Mo3 EN 10028-3, 16Mo3 acc. to EN10028-2, 16Mo3 EN 10028-3   
SA204 Grade A, SA204 Grade B, SA203 Grade A, SA203 Grade B   
EN 14A, EN 14, SAE 1524, AISI 1524, EN14A, EN14 Carbon-Manganese Steel   
SUP6, SUP6M, SUP7, SUP9, SUP9M, SUP10, SUP10M, SUP11A Round Edge Spring Steel Flat Bars   
55Si7, 65Si7, AISI 5160, SAE 5160, AISI 6150, SAE 6150 Silicon Manganese Spring Steel Flat Bars   
API-5L-X42, API-5L-X46, API-5L-X52, API-5L-X56, API-5L-X60, API-5L-X65, API-5L-X70   
API 5LX-42, API 5LX-46, API 5LX-52, API 5LX-56, API 5LX-60, API 5LX-65, API 5LX-70   
API 2H Grade 42, API 2H Grade 50 Carbon Manganese Steel Plate for Offshore Platform   
Duplex 2205, Duplex UNS S31803, Duplex Din 1.4462 EN 10088-3, Duplex SAF2205, Duplex SAF 2205   
Duplex SAF2205 SANMAC, URANUS 45N, PREN>33, PREN>34, PREN>35, PREN>36 DIN 1.4462   
Super Duplex 2507, Super Duplex UNS S32750, Super Duplex SAF2507, Super Duplex SAF 2507   
Super Duplex SAF2507 UNS S32750 DIN 1.4410 EN10088 URANUS 47N(+) PREN = 41 A182-F53   
Super Duplex UNS S32760 F55 ASTM A182 F-55 SA182 F55 DIN 1.4501 UNS 32760


Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO10474 3.1 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS, NORSOK APPROVED STANDARD M630, M650 Rev.3




CORTEN-A Steel Plates S355JOWP EN10025-5 1

Member Information

ROLEX METAL DISTRIBUTORS
Country/Region:India
Business Nature:Trading Company
Phone:0091-9820292499
Contact:MUKESH SHAH (DIRECTOR)
Last Online:28 Jan, 2021