PoE Power Over Ethernet Injector Splitter Adpater Kit

This injector/splitter combo allows you to send power over the unused wires in a cat5 cable to power a device on the recieving end.  This is great for applications where you need to install a wireless access point, but a power plug is unavailabe or very far away from where the wireless access point needs to be installed.

See our diagram below for more detailed explaination.

The power plugs are identical to Linksys, D-Link, and Netgear 12v products.

Specs:

   - 12v devices will work up to 150 feet
   - 5.5 x 2.1 mm barrel connector (same as Linksys, Netgear, and D-Link routers)
   - works with 5v, 12v, 24v, and 48v devices.

Examples of compatible devices:

   - Linksys WRT54G wireless router
   - Linksys WAP54G wireless access point
   - Netgear WGR614 wireless router
   - Netgear FS108 fast ethernet switch
   - Netgear FS116 fast ethernet switch

Included in this auction:

   - (5) Power over Ethernet Injectors (for power supplies)
   - (5) Power over Ethernet Splitters (for remote access points)
   - Free Shipping

Note: this kit is not NOT for access points that need IEEE 802.3af standard